aem fuel rail fittng

[woooop]

i instaled a aem fuel rail and on the return side, i need to know the type size of fitting that goes into the black fitting off the rail. I want to put a 6an banjo on the return end because if i use teh fittings that came with the kit it hits the timing belt so i was coing to just put a banjo bolt and fitting on that end to shortin it up but i dont knowthe thred size that goes intothe black fitting comming offthe rail please help

 

[Nicks2319]

The black fitting is not threaded. It is simply held in place by pins, and sealed with an oring. If you want to upgrade the line size on the return end... purchase one of these fittings, and then get a 90 degree fuel fitting from summit. I ran this personally and it fit.

Slowboy Racing, Inc. :: DSM :: Fuel :: Fittings :: 6AN Fuel Rail Outlet Fitting