Such a long journey with this car! Quick overview:
96 gsx (got it as a shell)
93 vr4 jdm engine
tre stage 3 tranny
xtd stage 4 unsprung
stock injectors
walbro 255
fuelab afpr
hallman mbc
short route fmic
dsmlink v3
speed density
obx-r exhaust manifold
custom 3" borla exhaust
2 tranny rebuilds later (input shaft bearing) and a headgasket, the car is ready to go!! so i thought.... after a test drive, the 1g bov i was running appeared to be "too crushed" all of a sudden and would flutter when operating.
I decided to go with a NGR bov because I always liked the Greddy Type-S (now discontinued), liked the fact it had an upgraded diaphragm, and also liked the sound. Ordered it and got it 3 days later.
Box was plain, but inside, the bov was wrapped nicely and also came with a few screws and other mounting/installation items.
The install was easy (as with any bov). Took about 5 minutes. I used the gasket provided and a small layer of RTV just in case.
adjusted the screw inward a bit and took it for a spin (running 10psi for another 300 miles)--
YouTube - dsm ngr bov (short vid)
YouTube - dsm ngr bov (longer vid)
Overall, i have no complaints with my purchase. It does its job, has a nice sound, shipped fast, and goes for around $150. I would recommend it.
96 gsx (got it as a shell)
93 vr4 jdm engine
tre stage 3 tranny
xtd stage 4 unsprung
stock injectors
walbro 255
fuelab afpr
hallman mbc
short route fmic
dsmlink v3
speed density
obx-r exhaust manifold
custom 3" borla exhaust
2 tranny rebuilds later (input shaft bearing) and a headgasket, the car is ready to go!! so i thought.... after a test drive, the 1g bov i was running appeared to be "too crushed" all of a sudden and would flutter when operating.
I decided to go with a NGR bov because I always liked the Greddy Type-S (now discontinued), liked the fact it had an upgraded diaphragm, and also liked the sound. Ordered it and got it 3 days later.
Box was plain, but inside, the bov was wrapped nicely and also came with a few screws and other mounting/installation items.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
The install was easy (as with any bov). Took about 5 minutes. I used the gasket provided and a small layer of RTV just in case.
You must be logged in to view this image or video.
adjusted the screw inward a bit and took it for a spin (running 10psi for another 300 miles)--
YouTube - dsm ngr bov (short vid)
YouTube - dsm ngr bov (longer vid)
Overall, i have no complaints with my purchase. It does its job, has a nice sound, shipped fast, and goes for around $150. I would recommend it.
