96 gst no cam sensor

[duanewjackson]

There is no cam angle sensor on my 96 2g gst is this normal and if so wars the deal about it idk I'm just confused as shit I guess somebody help me out with some answers please

 

[eli96talon]

The sensor should be behind the intake cam gear.

 

[Gstclipse69]

On 95 and 96s the cam sensor isnt on the end of the valve cover by the intake cam. Its under the cams so you won't necessarily see it like you would normally.

 

[bstaley]

Check this thread out

http://www.dsmtuners.com/forums/maintenance-repairs/427460-will-car-run-without-cas.html

 

[duanewjackson]

And is that only 95 to 96

 

[duanewjackson]

Okay that answers all questions I wonder why they went away from doing that

 

[bstaley]

Okay that answers all questions I wonder why they went away from doing that

I'm guessing because its like 50 more steps to change it .

 

[duanewjackson]

Yeah true but it's a little bit cleaner of a look

 

[bstaley]

Yeah true but it's a little bit cleaner of a look

That's true but also with the 1g cas you can adjust the timing with a simple turn of the cas. Plus the crank position sensor and cas are bundled into 1 in 1gs'.

 

[WRXkiller92]

Yeah true but it's a little bit cleaner of a look

wait till you have to change it.

 

[bryanwheat]

That's true but also with the non 95/96 cas you can adjust the timing with a simple turn of the cas. Plus anyone correct me if I'm wrong the crank position sensor and cas are bundled into 1 in non 95/96.

You have 2 things wrong there. The 97-99 are NOT adjustable. Also the 97-99 do have a crank sensor just like the 95-96. 1g's from the factory are the only ones that don't have a crank sensor.

 

[bstaley]

You have 2 things wrong there. The 97-99 are NOT adjustable. Also the 97-99 do have a crank sensor just like the 95-96. 1g's from the factory are the only ones that don't have a crank sensor.

Thank you, that's why I'm here to learn all I can. Fixed!

 

[duanewjackson]

Thank also since we are all here have you guys ever heard of anyone making a custom mount for the 1g trannys to work in a 2g I think I may try

 

[bryanwheat]

A 1g transmission in a 2g won't work because there is no where on the case to mount the front and rear roll stops.

 

[dallasadkins90]

Thank also since we are all here have you guys ever heard of anyone making a custom mount for the 1g trannys to work in a 2g I think I may try

plus the 2g tranny is just a little stronger from a factory standpoint theres no reason to attempt this

 

[duanewjackson]

Roll stops what do you mean

 

[duanewjackson]

Well the reason I would attempt it is because where I live 1g are more common then the 2g so it's hard to get parts with out buying the new and all I have are 2nd gens

 

[bryanwheat]

Roll stops what do you mean

The front and rear engine mounts. On a 2g they bolt to the transmission. On a 1g they bolt to the block. There are no holes in the transmission to bolt the brackets to.

 

[duanewjackson]

I'm pretty sure they don't

 

[WRXkiller92]

I'm pretty sure they don't

they definitely do, I'm lookin at em right now.

 

[bryanwheat]

I'm pretty sure they don't

There is no question about it, the 2g front and rear roll stops bolt to the transmission.