The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

2nd Annual Northeast DSM Meet- MARK YOUR CALENDARS

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I need:
cam gear bolts
1g awd rear left brake hose bracket where it bolts to the strut

For some reason in my stack of calipers I have every one of those brackets except a drivers rear... WTH is with that?

No they def sell E85 on the PA turnpike I have seen it personally my self at the Allentown Service Plaza at the Sunoco gas station.

That is one of two places on the whole pike that has it. The other is Oakland.

daaaaamn all the way from pittsburgh!? That'll be a haul!

Pittsburgh HA! Thats 170 miles into our trek! :hellyeah:

I've got the trip figured out, we have to stop 4 times each way to make sure there is enough fuel in the tank to get to the next juice station. Were looking at roughly 9 hours. Probably more with stopping so many times to get there. So we will be leaving in the wee hours Saturday morning. I'm thinking around 12-1 just in case something comes up. Let's do it!!! :talon::dsm::laser:
 
For some reason in my stack of calipers I have every one of those brackets except a drivers rear... WTH is with that?



That is one of two places on the whole pike that has it. The other is Oakland.



Pittsburgh HA! Thats 170 miles into our trek! :hellyeah:

I've got the trip figured out, we have to stop 4 times each way to make sure there is enough fuel in the tank to get to the next juice station. Were looking at roughly 9 hours. Probably more with stopping so many times to get there. So we will be leaving in the wee hours Saturday morning. I'm thinking around 12-1 just in case something comes up. Let's do it!!! :talon::dsm::laser:

Fing CHAMP RIGHT THERE!!!!!:applause::applause::applause:
 
well I'm thinking I'm not going to be coming. :( By the time I get there people will probably be just about ready to start leaving
 
Sorry, I've been going back and forth between autocrossing my Cobalt SS or coming to this meet. So I finally made up my mind and I'm coming. Please mark me down for brining 2 packs of chicken for the BBQ and some BBQ sauce to cook them in.

Tom, I'll meet up with you at the Bridgewater mall in the AM.
 
I'm still planning on being out, even though my clutch is being stupid again, sometimes releasing sometimes not. I'll also be there with a couple other really nice cars even though they aren't DSM's, I hope eveyone's OK with that.
 
The weather will be awesome ... don't forget the sunscreen!

My wife & I will be there with our 'baby', so place us on that list!

I'm still planning on being out, even though my clutch is being stupid again, sometimes releasing sometimes not. I'll also be there with a couple other really nice cars even though they aren't DSM's, I hope eveyone's OK with that.


Guys, if you can, please bring something to eat so everyone can enjoy food. Doesn't have to be much. Thanks. Refer to the front page on what needs to be brought.

James
 
Better to confirm later, than never, but I'll be showing up it looks. Going to the track tonight with the Talon so hopefully nothing breaks on it and I can unload it from the trailer tomorrow.
 
Due to some unfortunate financial situation and a blown transfer case in my truck last night i have no vehicle to drive. So I amgoing to have to stay home and repalce the tcase in the truck this weekend.
 
I'll be there with Evo8/9 560cc injectors. 42,000miles on them i want $150 but if someone wants them tomorrow i can work on the price.
I can also bring a stock 2g intake manifold, 2g throttle body, 14b with slightly cracked exhaust housing and chipped turbine blades, 1g exhaust manifold. I'm not going to bring these unless someone contacts me a head of time.

I'm still debating what i'm going to bring tomorrow so i'll check back later.
 
Brian,

I'm sure I can get one or 2 people coming with me to buy chips...

Brent, good to see you are coming. Anyone else from the JMF camp coming? Joe?
 
Put me down for hot dog rolls, just got the pm, hadnt checked my messages in a bit. we still need those?
 
Brian,

I'm sure I can get one or 2 people coming with me to buy chips...

Brent, good to see you are coming. Anyone else from the JMF camp coming? Joe?

T i can buy 2 or 3 bags of chips if thats needed. LMK



Don't forget about the evo 560cc injectors i will have with me. Would really like to sell them tomorrow but if not no big deal. Hit me up if your interested in anything i mentioned forsale.
 
I don't think everyone knows she works at Extreme...

Chip, buy chips.

I just bought 16 hamburger buns, 16 hot dog buns and a big jar of ketchup.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 1g/2g Auto Welded Center Diff
    1g/2g Auto Welded Center Diff. Message 702-741-6987.
    • Galant665
    • Updated:
  • Wanted WTB MSD DIS 2 bypass plug
    As the title states.You must be registered to see element.
    • ist dwa
    • Updated:
    • Expires
  • Wanted ISO Extreme Psi weighted shift knob
    Easy peazy…
    • James92
    • Updated:
    • Expires
  • For sale 1g 91-94 ignition coil
    1g coil with harness side igniter harness. Digging in a box of remains from a yard six bolt for...
    • Galant665
    • Updated:
    • Expires
  • Wanted 2g Finish My Project!
    I am in need of some big ticket items in order to finish my project. In my engine bay there is...
    • dhssoccer24
    • Updated:
    • Expires
Back
Top