2G AWD E.L.H.S in FWD

[SanTa_]

So basically I found this thread through the search button, but only found it for a 1G.

My question is, it should be possible with the 2G as well correct?

I already have:
- AWD Intermediate Shaft

I just need:
- AWD Driver Side Axle

Is that all then? Any comments will be appreciated.

Trying to reduce the % of torque steer and get better equal traction.

 

[delta448]

http://www.dsmtuners.com/forums/drivetrain-tech/247093-awd-conversion-swap-guys-enter-here-advanced-merged-2-07-a.html

 

[DashLaflash]

I'm assuming E.L.H.S. stands for Equal Length Half Shafts. I don't think it can be done on a 2g, the fwd differential is different than the awd front differential. The axles have different size splines and are not interchangable. Pm Twicks69 for more information. He's one of the transmission guru's on here. If it can be done he would know how.

Edit: Here is something dave99gst posted on another thread involving this mod on a 1g. He says that he knows from experience it won't work on a 2g.

you would need both axels and a AWD jack shaft.
the mod only works on a 1g
( i know from experiance it wont work on a 2g )
best test is, goto the local auto parts, order new axels tell them ya want the front axels for a AWD. one ya got the axels ya can test fit them into the hub if all is well ya will only need to get a jackshaft from a j/y . if it dont work ya can alweays return them and say you wanted FWD ! and that you allready got the right ones elsewere

 

[SanTa_]

Yeah the splines are different. Thank you for the information! :]

Only thing that CAN be done is the AWD Tranny into the FWD.