2G 1997 GSX power steering pump bolt sizes?

[slowwhite]

My power steering pump is missing all the bolts on the passenger side of it causing it torque to the driver side which makes the belt rub on the pulley causing it to squeal.

What I've found through searching is these part number:
48959B
48959J

I can't seem to find the size/pitch of these bolts anywhere. As I'm sure we have the sizes at work we pretty much carry the entire Fastenal catalog here.

I thought I'd found the correct bolts in the past but none of them tighten down they just spin freely.

Anyrate I tried searching here but the links I found were dead.

 

[SasaniFab]

My power steering pump is missing all the bolts on the passenger side of it causing it torque to the driver side which makea the bekt rub on the pulley causing it to squeal.

What I've found through searching is thsee part number:
48959B
48959J

I can't seem to find the size /pitch of these bolts anywhere. As I'm sure we have the sizes at work we pretty much carry the entire fastenal catalog here.
I thought I'd found the correct bolts in the past but none of them tighten down they just spin freely.

Anyrate I tried searching here but the links I found were dead.

I believe the bolts in question are m10x1.25

 

[slowwhite]

I'll give them a shot thanks.

Edit: well no luck at work we have M10x1.5 sizes.. but no M10x.1.25

Will have to check Ace hardware or Lowes and hope I get lucky. Any chance you know the length?

 

[slowwhite]

Finally got it straight.

The bolts needed are actually:
M8X1.25x60
M8x1.25×30

I used lock washers also. As well as tapped the holes as 1 was partially stripped.