16g chra is mine still good ?

[geno414]

i was rebuilding mu turbo when my chra cracked off two peaces and i don't know if it is still good or not could some one that knows about turbos help me out i have two pictures.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

sorry i had to use face book to upload my photos.

Geno Farina's Photos | Facebook

Geno Farina's Photos | Facebook

any one ????

 

[JusMX141]

That's a boost leak for sure.

If the front side of the flange got chipped it wouldn't be such a big deal....or at least if the chips didn't go below the o-ring; but that will never seal properly.

 

[geno414]

crap alright thank you for helping me out at least i know now.

 

[JusMX141]

If you're just trying to get by, you can try placing the center housing into the compressor cover then use a small screw driver to push the o-ring into the groove completely, and put a small amount of RTV into the gap before installing the snap ring. It's half-assed, but it will get you by for now.