Hi, guys!After a few years of being out of the DSM scene, I finally picked up a 2G TSI AWD yesterday as a project. The guy I got it from had 3 DSM's. He said the MAF on the one he was selling was bad, so he unplugged it and hooked his DSM Link up to the car. It started right up and idled okay...

You must be registered to see element. You must be registered to see element. You must be registered to see element. You must be registered to see element. Hello all, I recently purchased a socketed eprom ecu and I want to get this figured out before it comes in. It has four vertical boards in...

In ECMLink my RPM appears to be going up and down.BoV is atmospheric, no speed densityTPS is set with linkAdjusting BISS Screw did not get rid of itMy tuner says he has not encountered this before and is curious as to what it might be suggested I post it on the forums to ask around. He...

As it states I have for sale a brand new Coolingmist Stage 1 system thats made for methanol, alcohol, or water to run through the lines. I had it on my last car and it was a blast and made tuning a lot easier as I was able to increase the boost from 22psi to 30psi(w/ HG and studs). Looking to go...

1). Any boost, vac, or exhaust leaks? Boost leak tested 5psi above your max boost with no leaks? No2). Verified mechanical timing? Yes3). Verified base timing? Yes4). Ignition system COP or Stock Coil: Stock Wire brand and Age: NGK, 3 Months Old Spark plug brand, type and Gap: NGK BPR7ES...

So while trying to data log, so I can tune for the new turbo setup, the computer just stops/freezes. It never records the same amount of time before it stops data logging. Sometimes it will record 90sec other times I will only get 20secs, never the same amount and it is making tuning a...

What's up party people!? New to the tuning game and it's starting off about as expected... can't get my car to idle You must be registered to see element.-2g gsx running ecmlinkv3 -1g swap, plug order switched -non 95/96 CAS checked -3" gm maft set to aux4 base2, everything else zeroed out...

Alright i need some help with my 1g. car has link v3 and 1260 injectors on e85. walbro 450 pump borg warner s366 speed density with an omni 4 bar and gm iat.Had the car running and cruising decent, except for the idle. Tonight i ran into a few big problems.1. I finally figured out the isc...

I have my AEM digital wideband all wired up and working properly (as far as I can tell). The sensor is installed on my test pipe in front of the rear o2 sensor. I am trying to tune for speed density right now before I throw in ID 1050X's, Fuel lab FPR, AEM fuel rail, comp 102s and kiggly SS...