Turbonium
20+ Year Contributor
- 175
- 0
- Jul 22, 2002
-
Ithaca,
New_York
alright my setup is different now then from when i made my profile and i'm still adding to it. but right now what i have is a starion FMIC with a 2" pipe welded on one side and 2.5" welded on the other. My IC pipes start out at 2" from the turbo down to the FMIC and from the IC to the throttle body i have 2.5 inch pipe. i WILL be buying a GM MAFT and turbo xs rfl. i'm in the process of putting in a 190lph walbro pump (i didn't want to mess w/ getting an AFPR) now i plan on running 93-94 octane gas which is fairly easy to get around here. other than thta my only mods are 2.5 inch exhaust and k&n filter. i would like to run about 18PSI and i really don't want to mess around with getting injectors..... Will the 94 Octane and 190LPH pump be enough to meet my fuel needs?? i know w/ a stock smic and stock MAS i could probably get away with it but i'm not sure how the new FMIC and 2.5" IC pipeing will affect it or how much the MAFT affects it. thanks alot guys
Ryan
Ryan