The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

PXL_20241027_172318431.MP.jpg

1G Talon

1991 Eagle Talon TSI. Bone stock (everything), 6bolt, 5 speed, 3bolt LSD rear.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Today's goal is to finish this control arm up, 1 more full coat of black and I'll be happy
1000014906.jpg
1000014905.jpg
Next I'll begin cleaning up the spindle/knuckle whatever floats the boat while that dries
1000014907.jpg
1000014908.jpg
AND if I'm lucky enough I'll get the sway bar cleaned up and prepped for paint.
 
All cleaned, prepped for paint💪 2 coats of primer, I didn't lay any black yet just wanted to get some paint on these
1000014909.jpg
1000014910.jpg
I think for just primer they look alright, I'll be happier when they're finished and back on the car😉
1000014911.jpg
1000014912.jpg
I even managed to get the sway bar all cleaned up and 2 coats of primer thrown on given I was limited on time tonight.
1000014913.jpg
Same primer gray, although the sway bar will be finished in a "coastal gray" I found.
1000014914.jpg
 
Woohoo! Pass. Control arm is done! I forgot the bearing for the hub/spindle so that'll be something to do over the week.
1000015135.jpg
current state of my interior 🙃, have a tight spot in the shifter I need to figure out(almost like a small bind) still need to get this headliner done and the interior can go back together
1000015136.jpg
 
Check it out, sway bar is back on (my God that was a PIA). I read a few older threads on here that said it would be one of the hardest things to do and I will say it was horrible, BUT it's on and it looks good. I think at this point I need to order more parts🫣, and put the pass. side back together.
1000015707.jpg
1000015706.jpg
I have a RockAuto cart put together to finish up the front end(all the rubber brake lines, 2 struts, sway bar end links, calipers and rotors), except for the brake hard lines. I will be doing the OEM 2 piston "big brake" upgrade from the 93+ DSM or 91/92+ non turbo stealth/3000GT. Getting closer!! Have I mentioned how excited I am yet? I'm sure the wife is tired of hearing it by now😂. Once the front is done I'm gonna move this party inside the garage and get the rear subframe out. That's where the fun really begins!
 
Finished up the pass. side, at this point I need to order parts. I need to get some cash stacked up for this next RockAuto order. I got my center console back together, the shifter is nice and tight once again. Maybe this weekend I'll finally get the headliner done and I can get the interior back together
1000015985.jpg
1000015984.jpg


1000015986.jpg
 
Last edited:
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top