Your most recent welding pics

[Archer Fabrications]

The fuq is razorweld . Serious though. Havnt heard of them.

 

[Gamble97]

Their China company is called jasic. Designed and engineered in Australia and built in China.
So another importer but the best name of welders in China.
Supposed to be awesome machines. Waiting to get my hands on one still.

 

[Archer Fabrications]

Well let me know how it is as time goes on and saving up for the dynasty, I'd entertain other machines of equal quality.

 

[abelebd]

some welding pictures from my last faward facing manifold.

You must be logged in to view this image or video.

 

[abelebd]

You must be logged in to view this image or video.

 

[abelebd]

Finished manifold compared to old setup.

You must be logged in to view this image or video.

 

[abelebd]

Here are a few warmup welds on some 4130 before starting on my new k member.

You must be logged in to view this image or video.

 

[abelebd]

You must be logged in to view this image or video.

 

[Gamble97]

Is that 80s-d2 filler?

 

[abelebd]

Is that 80s-d2 filler?

ER70-s2 i believe.

 

[Archer Fabrications]

that looks awesome, i need to pick up some 4130 and try out my new notcher on it. how much does it run per ft in that dia?

70-s2 is the way to go with chromoly

 

[Archer Fabrications]

single pass 304 with 316 filler sch40 test pass

 

[Gamble97]

Use 312 filler

 

[YZFR1]

Made a pull up bar for my garage hopefully, i'm not going to bust my ass

I'm going to beef it up some more before putting it into use.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[CODE4]

Pulled the trigger and ordered myself a Miller Dynasty 280DX today... I am excited for it to come in. I have been using a maxstar 150 and an everlasting 200DX for the past couple years and ready to move up.

Going to make a custom cart and water cooler for it once I have it. Already have an SSC pedal for it, and am deciding between a Weldcraft CS 310 or a CK 230.

Pics when it arrives

 

[DSM Jeff]

I've been looking more and more at pulling the trigger on a Dynasty 200DX. Seems there is just a lot of good feedback for it and has the size and features that I feel could be useful for me for a long time. Did you just need a bigger machine in going with the 280?

 

[KYNgsx]

From earlier tonight, building a new downpipe:

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[CODE4]

From earlier tonight, building a new downpipe:

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Electro polished tubing?

That has a pretty bright shine to it, moreso than the sanitary tubing I use daily.

 

[CODE4]

I've been looking more and more at pulling the trigger on a Dynasty 200DX. Seems there is just a lot of good feedback for it and has the size and features that I feel could be useful for me for a long time. Did you just need a bigger machine in going with the 280?

Not immediately, but for the semi frequent aluminum work 200 amps is not really enough head room for the duty cycle rating. And I really like the expandability of independent AC amperage adjustments found on the 350 DX available via upgrade. Obviously for home fabricators the 350 is pretty far up there on price.

 

[DSM Jeff]

Thank you for that info.

 

[KYNgsx]

Electro polished tubing?

That has a pretty bright shine to it, moreso than the sanitary tubing I use daily.

Not sure about that. It's a QTP cutout in that picture, says its 304 but not the exact polishing method.

One more from yesterday, regular non polished 304L on the top:

You must be logged in to view this image or video.

 

[CODE4]

New welding machine arrived today. Need to pick up some mating NEMA L6-30 connectors, and probably some 10 ga. SJ or SO service cord to wire it up. My Everlast is setup with NEMA 6-20 and 12 ga. power to the wall - not enough for the Dynasty. Already downloaded the lastest firmware to an SD card and as soon as I have it powered up I will get some arc time going to see how she performs.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Archer Fabrications]

That looks tiny! Awesome! How come you didn't opt for the water cooler, looks just like the little miller pocket tig i used at work for while I'm on the skids.

 

[Prib9671]

Nice purchase Code4. I got a Syncrowave 200 a while back and really like it but, wish there was a few more controls. There are a ton of settings on that Dynasty! Have fun with it.

 

[Archer Fabrications]

You willing to pm me how much that ran you? I was looming at the basic water cooled
For 3500