what cars have 2.4 crank?

[boostwut]

I'm building a hybrid motor or should i say repairing one its got 1g 6 bolt bottom end stock with balance belt and shaft deleted. with a 2g head 272 cams and crower valve assembly. now this is going into my 96 talon and i got all pretty much ready but last minute i decided to go 2.3 or 2.4 and i was told its done by simply changing the 6bolt crank, rods, and pistons. what i don't know is what cars and years came with the parts I'm looking for.

thank you for your time.

 

[hubz91talontsi]

So you're asking about the 6 bolt 2.4?
Expo's, summits, mightymax, d50, and the sonata. You could find a 6 bolt in any of these made in 92 and earlier.

 

[robtheturbopric]

Also the early 90-94 galant

 

[hubz91talontsi]

89-92 galants are 4g63's. 92-94 are 7 bolt 4g64's. Early 1989 5th gen galants came with a 6 bolt 4g64. I've never seen a 5th gen though.. Not sure if they were here in the states or not.

 

[danymuck]

So you're asking about the 6 bolt 2.4?
Expo's, summits, mightymax, d50, and the sonata. You could find a 6 bolt in any of these made in 92 and earlier.

I didn´t know many 4g63 2.4. Thanks for the info!

 

[boostwut]

so pretty much by tacking the crank rods and pistons off one off these and putting them into my 92 6bolt 4g63 it would become a 2.4L or 2.3L? and whats the more common car to find for these parts.?

 

[pauleyman]

It is not simply changing these parts. Crank yes, pistons and rods no. You'll need aftermarket parts.

 

[hubz91talontsi]

Crank and rods yes. You will need pistons that are usually labeled 2.3 pistons or stroker pistons. I would recommend upgrading rods if you run a aftermarket piston.

 

[boostwut]

o ok i understand ... ### rods and pistons are usually used for this kind of build like brands?

just to give me an idea of what to look for. when im searching.