What AN fittings do I need?

[Gamble97]

To connect from the fuel filter to the fuel rail. I had some of the SS line in a -6AN, but am unsure of what I need. Could someone help me with what fittings I need or part numbers.

 

[ndsti]

Call slowboyracing.com and ask them for the fuel filter fitting that has mitsu threads to -6an. But make sure that they ship you the upper fitting and not the lower one! Slowboy also has everything that you need to connect eveything up.

 

[Gamble97]

Does anyone have them that is less expensive?

 

[4wd-Eclipse]

Check this fitting part # EAR-991945ERL ($6.95) in www.summitracing.com

 

[ndsti]

Their you go, that part will work. Have fun!

 

[Gamble97]

That is for the fuel rail inlet? Do I have to tap the fuel rail then?

 

[ndsti]

No that fitting is for the top of the fuel filter! You can tap the fuel rail if you want, but if you don't then i would recommend buying the fitting for the fuel rail from slowboy. It will make your life a whole lot easier. Everyone likes to be lazy

 

[Gamble97]

So I need the piece listed above, and a regualr -6an fitting for the fuel filter side? or a 45* degree angle for that side?

 

[Gamble97]

Thus far in my cart that I know I need are:
EAR-991945ERL

And is this the other piece I need? EAR-804606ERL
And then just the part from SBR and that's it?

 

[Gamble97]

Somehow after doing all the math and making the kit myself, I think I'd be saving a huge $8-$10. big deal

 

[ndsti]

You don't have to buy earl's you could just buy summit brand fittings their the same and maybe alittle cheaper!
You will need.
The earl part
The part from slowboy
Either one 6an 45* and one 90* or two 45*'s it's up to you!
Yeah i know its not a huge savings but thats $8-10 that can go somewhere else!