Weird O2 readings.....

[Ho0ked]

Whats going on with this log

Front O2 would not come out during 50trim install....did spray Pb blaster on it from the inside in an attempt to get it to come loose maybe I f00ked it up ?


And yes I have a nasty boost leak at the throttle body elbow going to fix in the mourning.....


I don't know how to get this to paste with the rows spaced out, sorry

8/24/05-17:56:13 - Obd2
Time RPM Timing O2 1 Bank 1 O2 Trim 1 Bank 1 O2 2 Bank 1 O2 Trim 2 Bank 1
00:00.6 3528 34 0 2.34 0.08 3.13
00:01.1 3836 28 0.64 0 0.4 0
00:01.7 4204 22 0.84 0 0.96 0
00:02.2 4668 20 0.86 0 1 0
00:02.8 5152 16 0.88 0 1.02 0
00:03.3 5612 16 0.88 0 1.02 0
00:03.9 6056 18 0.88 0 1.02 0
00:04.4 6452 20 0.88 0 1.02 0
00:05.0 6772 21 0.86 0 1.02 0
00:05.9 5084 39 0.6 0 0.86 0
00:06.4 4876 16 0.78 0 1 0
00:07.0 5056 16 0.78 0 1 0
00:07.5 5264 16 0.76 0 1 0
00:08.1 5468 16 0.74 0 1.02 0
00:08.6 5680 17 0.72 0 1.02 0
00:09.2 5852 19 0.68 0 1.02 0
00:10.1 6124 20 0.66 0 1.02 0
00:11.0 6344 20 0.62 0 1.02 0
00:11.5 6484 20 0.6 0 1.02 0
00:12.1 6608 20 0.6 0 1.02 0
00:12.6 6724 21 0.58 0 1.02 0
00:13.2 6808 21 0.58 0 1.02 0
00:13.8 6904 21 0.58 0 1.02 0
00:14.3 6992 23 0.58 0 1.02 0
00:14.9 6464 23 0.58 0 1.02 0
00:15.4 5016 39 0.36 0 0.9 0.78
00:16.0 4860 35 0.32 4.69 0.94 5.47
00:16.5 4700 24 0.32 0 0.94 0
00:17.1 4560 24 0 0 0.92 0
00:17.6 4432 24 0 0 0.46 0
00:18.2 4284 24 0 0 0.04 0
00:18.8 4120 23 0 0 0.02 0
00:19.3 3956 23 0 0 0.02 0
00:19.9 3804 23 0 0 0.02 0

Heres another version for those that don't like this one....

 

[spyderturbo007]

Does you O2 voltage cycle at idle after the car is warmed up? What do your FT's look like at idle? What is your TPS at WOT?

You don't need to log the O2 trims or O2 Bank 2 .

 

[Ho0ked]

Can't see voltage at idle with pocket logger?

Haven't looked at FT yet.

TPS is 100%


I think I killed my front O2 ?



Thanks guys

 

[spyderturbo007]

Can't see voltage at idle with pocket logger?

Uh, yes you can.

Just start the car, wait for the logger to connect and choose O2 bank 1 under the parameters menu. Then sit there and take a look at the O2 voltage. You can take a look at the FT's at the same time.