prodsm
20+ Year Contributor
- 258
- 0
- Nov 12, 2002
-
canada,
Hey...
90 tsi awd (w/ cruise control)
I just recently fabricated an UICP which is 2.5". I have also installed a 2g throttle body elbow to meet with the top of tha UICP. My problim is as follows:
-The UICP is placed in between the 2 cruise control cables...
-my idle is stuck at 2k rpms...
The bottom cable on the cruise controll is being pushed down quiet a bit because of the thick pipe and the BOV mounted under it aswell... leaves no slack in the bottom cable....
Is the throttle cable being slightly opend by the 2.5 pipe being inbetween the 2 cables?
thanks..
90 tsi awd (w/ cruise control)
I just recently fabricated an UICP which is 2.5". I have also installed a 2g throttle body elbow to meet with the top of tha UICP. My problim is as follows:
-The UICP is placed in between the 2 cruise control cables...
-my idle is stuck at 2k rpms...
The bottom cable on the cruise controll is being pushed down quiet a bit because of the thick pipe and the BOV mounted under it aswell... leaves no slack in the bottom cable....
Is the throttle cable being slightly opend by the 2.5 pipe being inbetween the 2 cables?
thanks..
