Tbelt + car dies

[holb]

Thing is if I ease on the throttle it revs fine, but If I just hit the throttle to the floor the car dies instead of revving up. If I ease the rev's up slowly by easing on the throttle, then take my foot off the throttle fast; the idle will fall and car dies. I switched the MAF/Intake off my friends 2g (J13eck) and put it on mine and it stopped the dieing from releasing the throttle fast, but still died if I pressed the throttle fast.

I still haven't checked what's cutting up my timing belt yet, sicne I cant even drive the car ### it wont go into gear, but the belt has gotten to whatever is rubbing my timing belt as cut it up to the point that it needs a new one now. Also I took my non working PS out of the car and the squealing noise didn't happen when I revved slowly, car sounded fine unlike the other nights.

Here is the timing belt wear....

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[gurmanator]

idle?timming or vacuum leak...t-belt,to long of oil pan bolts,there are short bolts and long bolts.I learned the hard way

 

[Defiant]

http://www.dsmtuners.com/forums/fre...-pan-flange-bolts-go.html?highlight=pan+bolts

 

[AviGST]

i had that problem once it was my fuel filter