2G Strut Bump Stop Question

[Th3ory]

I did a search and found some information and Bump stops. I'm switching over to Koni Yellow/Eibach Pro-kit on my 97 TSi AWD.

Front bump stops looked great, rears were in rough shape. I see a post that stated KYB makes a good bump stop. However, has anyone used something like this: https://shop.advanceautoparts.com/p/rein-suspension-bump-stop-avz0559/11800487-p?c3ch=PLA&c3nid=11800487-P&adtype=&msclkid=a706e7bbfd2814a00936b9c47540739a&utm_source=bing&utm_medium=cpc&utm_campaign=b_lia_all_ride/control_struts_gen_gen_all_pros_aap_us_all&utm_term=4581046485354117&utm_content=Bing_LIA_Ride Control_Struts_Strut Hardware & Accessories&gclid=CLCnopbYvegCFQUAfwodSq0PpA&gclsrc=ds

I would prefer to use the KYB bump stop and am having trouble finding the part.

Here is a picture of the rear Bump Stop, Looks pretty rough to me?

 

[Th3ory]

Anyone have any luck finding new 2g AWD rear bump stops? I am having a little trouble finding a set.

 

[ThunderChild]

Like these?

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[EvoXcrZy08]

Rockauto has a few options.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[91talonts1]

Anyone have any luck finding new 2g AWD rear bump stops? I am having a little trouble finding a set.

I was able to find a full OEM set when I replaced the struts and springs on my car. I was also able to source all new cups and dust boots from mitsu as well but it's been a couple years. MB949043 the part number for the bump stops, same one used on the 3g eclipse from what I remember.

 

[Widgmaster]

I have been asking about bumps stops on Club3G since last year .. Page after page but no real answer.. I have KYB-AGX struts with Tein S-tech springs. I see Rockauto.com has the part for a KYB but it is a bit confusing .. They show the KYB SB103 fits both front and rear but I can`t see how this is possible. The shaft on the rear strut is about a 1/2" while the fronts are 3/4 or better.