?'s about wiring connectors

[cmcelroy09]

I need some help figuring out which connectors go where. Here are some pictures for you guys:

1. These two are on the pass. side fender area

You must be logged in to view this image or video.

2. This is a single spade terminal plug right below the TB

You must be logged in to view this image or video.

3. This is around right behind the intake manifold on the driver side.

You must be logged in to view this image or video.

 

[Rob10_99]

ABS unit, looks like your is gone?
The white plastic one looks like the TPS switch, the others may be the evap setup, been so long since I haven't had mine.

 

[inthemidst]

1 the big one connects to another section of your harness,the four terminals im not sure.2 goes to the throttle stop sensor next to the throttle lever.3 eighther goes to your knock sensor or egr temperature sensor

 

[Rob10_99]

+1 yeah that last one is a knock sensor plug, find the other half!

 

[inthemidst]

oh i just remembered the four terminal plug might connect to your starter harness.

 

[cmcelroy09]

Ok the last one is definitely not the knock sensor. That was the first thing I checked! But anyways ABS was removed before I bought it so is the big connector for ABS?

Anyone else know what these are?

Ok I got the single spade terminal plugged in. So do I not need the big connector? Also the 4pin is not the starter harness thats all squared away.