running on 3 cylinders~ cont.

[Jist_95]

Hello all- i posted a week or so ago when i started having trouble with my 95 GST. The short story-> i was driving on the freeway and the car started to act funny (like it wasnt running on all cylinders). I got it into my parking garage, changed the plugs, changed the wires. After i checked for spark with the new wires the car did not start. It would sound like it was firing up but it would never catch. So with a few phone calls i got a hold of a diagnostic scanner.

The scanner read a P0301B cylinder 1 misfire.. Now that im aware of this code, im not sure where to go next. Im guessing i need to start looking at possibly the cylinder 1 injector, or possibly the fuel relay? Im looking to see if you guys had any suggestions to help me get er running again. thanks

 

[1gnow2g]

If you got the wires back in correct, I would test the compression,
just to make sure. If that is OK, then start with the injectors

 

[Locke]

Double check the firing order.

 

[Jist_95]

the wires are in the right place

 

[Locke]

Check fuel pressure and test compression.