[RESOLVED] Plugs and Plug wires

[xxsupralvrxx]

ok my car has 193K+ miles an now that Iam starting to modify the car I wanna replace the wires an plugs with somthing a little more aimed at what I plan on doing with the car. I wanna make it into a weekend track warrior. Now I know Ngks are the way to go on the plugs but what about the wires. Now I have seen that MSD's are the best then i have seen good/bad on magnacores an same with accels(sp?). Now Iam not sure if their is any new info on wire to get or what so I would like some help please.
My current Mods are K&N filter, a 3" DP, a MBC, and a electronic boost gauge. I also have boost leaks... Iam only pullin like 15-16 at an idle when the motor is warm an the boost spikes to 16ish an drops all the way to redline.. a freind is goin to a FMIC so Iam gettin his Supra sidemount and dejon tool pipes for a good price. If any of that was relavent

 

[Got Grip]

I've been running Accel wires from Extreme PSI for the past ~7 years on my car (a couple new sets in that time frame, but all Accel. No misfires currently at ~36 PSI, stock coils, BR8ES's and an ARC-2. Before the ARC-2 I'd only have misfires if the plugs were not fresh.

 

[xxsupralvrxx]

BR8ES's-NGKs? an what is a ARC-2? Thanks for the info sir

 

[Scoped_GST]

well hes running an arseload of boost so those 8es's are gonna be too cold for street boost levels. if youre like most ppl in the 15-25psi range bpr7es plugs gapped to 0.025-0.028 with some decent wires (i reccomend a thick 8mm or 10mm set of wires) should be enough to cover ignition.

you dont need an arc-2. your stock system will do just fine.
giving 36psi advice to street modders.

 

[Defiant]

http://www.dsmtuners.com/forums/newbie-forum/147476-answer-spark-plug-wires-ignition-wires.html