REQUESTING: oil cooler pictures and installs for tech article

[blcknspo0ln]

Hello guys,
I want to submit a final article for all of those who are looking for an external oil cooler install writeup. Thanks to Spoolin98 for his submission to me to help me put mine together. Please feel free to post your resources, writeups, pictures, part numbers, mounting solutions of your external oil cooler setup. I have various pictures for my 2g and it would be nice to have one for 1g's also! post away!

 

[blcknspo0ln]

www.jnztuning.com - 1990 oil filter housing ~$90.

www.anplumbing.com

21908 - 19 Row Heigh 5-7/8". Face width (Between tanks) 4". Fitting Centers 5-1/8". Body Width 8-1/4". Thickness 2". $115.49

800108 - Swivel-Seal Straight Hose End - $7.99 x2

809108 - Swivel-Seal 90 deg/ Tube Hose End - $19.99 x2

9919EFJ - Metric thread male to AN adapter male - $7.99 x2

306008 - Auto-Flex Hose (Use Swivel Seal, Auto-Fit or Auto-Mate Hose End) - $35.82

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Total cost was $313.32

 

[Spoolin98]

Tom,
Thanks for the credit, its much appreciated
This was a great idea to write up a tech artcle on this, I just didnt have the time. It took me long enough to do all the research and piece together a kit like this. All my free time goes to my build and trying to get my car on the road before winter.
BTW, nice illustration!

Here are some pictures of my setup, which is identical to Tom's, except I used ss line I already had instead of purchasing some from anplumbing.com. I also used the stock crush washers between the part number 9919EFJ and the oil housing itself, which I also ordered from JNZtuning.