Removing rear wiper

[93Lzr]

I have searched multiple times on this topic but haven't found on for a 1g.
I want to reprint my rear wiper like I did with my front but can't figure out how to get it off. 93 laser rs turbo awd. I know on 2g you just pull but I couldn't get it by just pulling. Anything else I have to do?

 

[bryanwheat]

There is a cap over it, flip the cap up, remove the nut than remove it.

 

[93Lzr]

How hard is it to pull off. I already took that nut off it.

 

[MrCii]

You might wanna try some PB blaster or other type of lubricant, there's more than likely rust holding it on there.

 

[H@xtGSX]

It is probably rusted on the splines. Soak it with some PB Blaster or Seafoam and pry it up from under the wiper arm. Mine took some pretty hard "encouragement" before it came off.

 

[2GbTalonGuy]

Yeah, they get a but rusted on. Like stated, just let it soak in some WD-40 or PB blaster. Just be careful not to scratch the car while prying.

 

[93Lzr]

Alright I'll try today. Thanks for the tips.

 

[Gruff511]

They are always a PITA to get off just use a little force.

 

[Custom GSX]

Yea there hard to get off but so worth it. I just deleted my wiper on my 1g. Will have pics up soon.