radiatior support/bumper etc.

[Blu90GST]

I bought a 1990 gst. Long story short it was pretty messed up and the guy hit a mildly short object and tore everything up. The radiator support was pushed up and back and I'm looking to replace that whole section of the car if I can, or maybe have a tube one made, if it wont be too expensive. If anyone knows where I can find one or who I can get to make a tube radiator support made that would be great.

Example: http://www.dsmtuners.com/forums/custom-fabrication/438805-tubed-front-end-ffm.html

I could weld it to the car if needed.

 

[Ghost_92TSi]

You are better off building your own. The one you linked is specific for his setup.

 

[Blu90GST]

I would but I don't have a tubing bender or a welder of my own

 

[nitrouskris]

I bought a 1990 gst. Long story short it was pretty messed up and the guy hit a mildly short object and tore everything up. The radiator support was pushed up and back and I'm looking to replace that whole section of the car if I can, or maybe have a tube one made, if it wont be too expensive. If anyone knows where I can find one or who I can get to make a tube radiator support made that would be great.

Example: http://www.dsmtuners.com/forums/custom-fabrication/438805-tubed-front-end-ffm.html

I could weld it to the car if needed.

its custom nobody makes a kit and prices start at $550.00 for DSM