The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

New DSM owner lots od ?'s need answers

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

91EclipseFWD

Probationary Member
14
0
Sep 25, 2004
Falmouth, Kentucky
I just recently got a 91 eclipse 2.0L non-turbo FWD. It has 191k and smokes really bad been looking into buying a rebuilt or low mileage engine but costs are great for everything i've found. So I'm thinking my only option is rebuild it myself with the help of a few mechanics on their free-time that I know. Could anyone tell me everything that i should replace for the best possible results. Everything that should be changed. Also i have the idea of converting to a turbo but not for awhile so anything i would need for that, that could help on the rebuild now without hurting it being a non-turbo. Any suggestions and answers would be greatly appreciated.

Also when i got the car the transmission only had 1st,2nd and 3rd. I pulled a tranny out of a 93 eclipse non -turbo. It grinds going into 1st and throws out of reverse sometimes. A mechanic told me it's probably a synchronizer if anyone could help with that also. I still have about 21 days to return the tranny and i know where a good one is for $125 so I'm not sure which would be the best route.
 
With the engine that you have you should just wait until that engine goes. If you are wanting to upgrade to a turbo engine then start saving and look around. Thats why I think you should just go on the engine that you have now. With the tranny I would say that the synchronizers are going out since you always grind first gear. I would go back and buy that tranny for 125 even though that does sound pretty cheap? Check on that tranny before you buy it. Good Luck
 
Thanks, I plan to drive it until it blows. Do you know anywhere i could get a complete rebuild kit i found one at www.machv.com for $499.00 do you know anywhere cheaper and one that might include cams. Do you know if I could use bigger cams and it says they have a bore of .020 also should i get that my motor is old and alot of hard miles so it may need to be bored? Thanks for your help.
 
Ronnie01 said:
With the engine that you have you should just wait until that engine goes. If you are wanting to upgrade to a turbo engine then start saving and look around. Thats why I think you should just go on the engine that you have now. With the tranny I would say that the synchronizers are going out since you always grind first gear. I would go back and buy that tranny for 125 even though that does sound pretty cheap? Check on that tranny before you buy it. Good Luck

turbo to non turbo swaps are a pain in the balls just rebuild what you have
check theses guys out they are good
http://www.ffwdconnection.com/
:talon:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 4G63 WTB Evo 560cc injectors or 450cc
    Im looking to pick up a set of evo 560cc injectors or possibly a set of 450cc injectors if the...
    • eclipsemf
    • Updated:
    • Expires
  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
Back
Top