The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

My depressing DSM story

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Crawl

15+ Year Contributor
325
2
Jan 8, 2005
portland, Maine
Jan 2005 - Purchase 1995 Eclipse GSX with 114k
Feb 2005 belts snap, turns out to be crank pulley, replace it with underdrive pulley
From Then on the car has YET to stop breaking. The car started knocking about a month ago and I call some local shops to get estimates on rebuild, cheapest quote i found after taking engine out and such was about 2200. I found a "NICE" guy on the dsm classifieds selling a JDM Motor with 30k on it and purchased it from this guy. 950$ after shipping. Decent deal.... if it was real. After many many days of painful processing the engine shows up in Maine an hour and a half from where I live and I have to go get it. I pick up the engine bring it to the shop whom im having install it (did i mention i had to borrow all this money from my parents.... ) They take off the Oil pan to find shavings in the pan, the crank moves BY HAND, and it definitely has more than 30k on it. Now lets back up a bit

Just before this I saw a guy on the dsmtuners.com classifieds selling a freshly rebuilt port and polished head. He claimed it had brand new valve train etc... The head comes, it was packaged with packing peanuts..... Ok you can just imagine what thats gotta look like

So finally I get done cleaning out all the peanuts to see that it is only partially ported, Does not have a full new valve train, and that it has been blown and then rewelded with a healey coil..... So yeah thats no good to

Ok back to status, The guy with the head is not responding, and I just found out about the engine today so I am waiting to hear back from the guy who sold me the engine. I have a loan on this GSX for 5500, plus the money I had to borrow from my parents, plus All the money I have invested since I got the car, and the car is no where close to running because People insist on F****ing me.

So guys, when you are considering ripping someone else off, remember this is a fellow DSM'er, Who most likely isnt rich, who cant afford to be ripped off. The 2 people not mentioned have cost me apprx 1700$ after all things taken into affect, and i wont count the fact that I dont have a damn car and cant get anywhere or to work etc... I am an average hard working 23 year old with a steady job and alot of bills. I am far from rich and You have totaly screwed me, Thank you

I am waiting 2 days to hear back from both persons, If i have not recieved a Full refund by then the company lawyer will be contacting both of these people, as they were kind enough to give me there cell phone numbers, home address's, and the mechanic can gladly testify the condition in which these parts where recieved. Seeing how I have nothing to lose and It wont cost me a penny , Expect to hear from me
 
Wow sorry to hear you've been screwed so bad lately. Hope everything works out alright. I know how it is being young with not much money and a dsm its rough. Good luck in the future.
 
well if these guys can find it in there hearts to give me the cash back, or if I have to use lawyers, then Perhaps I can get the cash together to do a rebuild, though I hate the idea of rebuilding a 7 bolt that walked
 
The darkest corner of hell is reserved for theives and whores. Go get 'em. To shaft a fellow DSMer is reprehensible. No mercy, imo. :notgood:
 
yeah, go sell your crappy 4g63's to Honda owners :thumb: hehe , j/k, However much I hate honda, Nobody deserves this crap

p.s. I plan to take this as far as nesc. to get my money back, even if it costs me that to pay the additional lawyer fees, If i come back with my pride that they got what they deserve, ill still be happier if anything
 
The people who are scamming you are chicken-shit assholes who are too poor and lazy to work and make money for themselves. Plus, they prolly have no guts or balls. I bet if I sat here and called them trashballs, losers, poor, ignorant, etc... they wouldn't have the balls to step-up in this thread. I can't wait until they get screwed. It will happen.
 
UPDATE: My boss is going to lend me what I need to get the car back up and running. He is also lending me his lawyer to go after these guys and is going to help me get my money back. Ill let ya know how everything turns out
 
Did you get your car from a dealership? If you did check your warranty on your car? I had a 95 RS that I got from a dealership and I had a loan out on it and a couple of months later I blew the engine up. I called the warranty company and they paid for a new one. Good luck
 
That just plain sucks. I know how it feels to have your ride crap out on you and to be short on funds. Then to get scammed like that, that's bs. I hope you get everything worked out and nail the people who scammed you.
 
Crawl said:
UPDATE: My boss is going to lend me what I need to get the car back up and running. He is also lending me his lawyer to go after these guys and is going to help me get my money back. Ill let ya know how everything turns out


sounds like a nice boss
 
unfortunately no warranty bought it from another guy in Maine.

Nice boss... no, just rich. He is gonna lend me the money but im going to be his personal Biotch for a long time to come :-/ but I gotta do what i gotta do. I need my car back
 
Since your in Maine, and want to get your car back "right", why not give Mark at www.overbore.com a call, trade him your scrap crap + some cash for a properly built long block, drive off with your 60,000 mile warranty against crankwalk or any other problem.

Sucks to hear it man, I got ripped on a "99 GSX engine with 70K, pulled, ran great, put in fully Built 650hp 6 bolt." Started knocking in under 100 miles, crankwalk victim.

I am dealing with Mark right now, and let me say this. He is hard to get ahold of for me because of the 2 hour time difference, but he always calls me back or emails me. If all goes well on this business that I am doing with him, I intend to do more on down the road (upcoming full on "drag car" :cool: ).

Best of luck.

gsxtacy
 
Hey crawl. I feel for you brother! I see that you mentioned that you bought the head from some one in the dsmtuners clasifieds? Do you remember who it was? This would be helpful to the next would be victim. I know that dosnt help you out much, but you may help save someone else the agony and frustration. But hey, keep your head up. These bastards will get theirs eventualy. 10 times fold! :mad: :toobad: :nono:
 
gsxtacy said:
Since your in Maine, and want to get your car back "right", why not give Mark at www.overbore.com a call, trade him your scrap crap + some cash for a properly built long block, drive off with your 60,000 mile warranty against crankwalk or any other problem.
Just for reference, every third post of gsxtacy's is to preach the praises of Mark at Overbore. :rolleyes:

Caveat emptor. But, I suspect you've already learned that one.
 
heh yeah, Also being in Maine doesnt really put me close to overbore.com they are in NY, i dont have a truck so getting 2 dead engines to NY is quite a feat on its own, not to mention hell still charge me quite a significant amount that I dont have :D

but thank you for the idea, im tryin to get everything worked out, i have contacted both sellers

One seems to be a possibly ligitimate guy who got ripped off himself and ran scared when I contacted him about it but now is facing me and basically doesnt have a job and already spent my money...

The other guy is a scam artist and I believe Im not allowed to share his name over the boards but I did email dsmtuners.com with all the info including his multiple aliases.
 
1.who are they?(so i dont buy anything from them) and 2.where are they from?(if they live near me ill see what i can "borrow" from them). i hate people like that. it really ticks me off. id just like to be around when it all comes back on them to see that look on the faces of the people who thought they got away with something is the best. times like this call for a good swift kick in the jewels :mad: good luck with everything i really hope they get what they brought on themselves. btw your boss got some extra money to toss this way DSMer with low income over here 2 :D j/k :thumb:
 
Well as mentioned above I dont want Defient to close my post so I cant post who they are, of course there are other ways of contacting me... :)

I plan to take full action against both of them. Im trying to get everything together right now and get my car back up etc.. definitely stressin me out, but Im not giving up yet
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 3 inch Magnaflow SS high flow cat
    3 inch Magnaflow stainless cat. High flow. 18.25 inches. Flange holes are 4 1/8 center. Has...
    • Galant665
    • Updated:
  • For sale 4G63 Forge Motorsports BOV
    Original Forge Motorsports bov. Adjustable with over 80 clicks on the dial. Nice to use for...
    • Galant665
    • Updated:
  • Wanted 1g 1991 Black Cherry Eagle Talon
    5-speed
    • bamatalon
    • Updated:
    • Expires
  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
Back
Top