The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

my alighnment specs

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dude3000zx

10+ Year Contributor
120
1
Mar 11, 2010
Athens, Alabama
got my alighnment adjusted.


how does this look in regards to tire life/wear?

left front right front
camber -1.7 camber -1.7
caster 4.3 caster 3.9
toe 0.02 toe -0.02
total toe 0.00

left rear right rear
camber -1.4 camber -1.7
toe 0.13 toe 0.09
total toe 0.22
thrust angle 0.02

thanks
 
A bit too much rear toe-in, but otherwise fine. Probably not worth changing unless you autocross.
 
Your steering wheel might be off a little and your car will probably have a slight pull to the right. As far as tire wear you will be fine.

Edit: you can easily fix that rear camber issues with some washers as well.
 
im running 4 washers left rear and 6 passenger rear. for some reason with even side to side washers the passenger rear had -2.2 and driver -1.8

so this is as close i could get rear camber

but my car has always had uneven problems

so is that rear toe in okay with that small amount of rear camber?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top