My 6bolt street swap

[talon_42o]

Hey guys I'v been reading and lurking for quite some time now. Ok so here's my story I have a full 91 tsi awd car with bad tranny no 3 or 4th gear car has 150000kms on it. I also have a 95 tsi awd with 279000kms on it. My goal is 300awhp street car that will be a dd I already have 4g64 crank a fp big t28. So I was thinking 6bolt 2.3 stroker. I'm pretty sure the t28 will make 300 whp I'm plaing on going dsmlink v3 with front mount intercooler. Just need some direction on like pistons and if i need cams I want to use the 2g head. And if any one has any other tips for rebuilding my friends dad is gonna help me with the swap so we have all the tools necessary.

 

[Lost_sol]

Sounds like a solid build

post pics when the build starts =b

 

[toofast82]

How's the motor in the 91? Is it just a bad tranny?

 

[talon_42o]

Motor is good havn't done a compression test or anything but it runs has a slight lumpy idle but its been siting for like 3 or 4 years.

 

[talon_42o]

The 6bolt had a perfect 165 across the board sold the 1g shell. The swap is currently in the works. DSM Link 3.0 is on the way with a new wbo2 Should have pics sooner or later. Oh yeah my ecu is eprom haha Lucky me.