The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

KYB gr2 and eibach Prokit. bad idea?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

airkingmt

20+ Year Contributor
31
1
Dec 13, 2002
Syracuse, New York
Hello everyone,

I have come across a good deal from a buddy of mine. A full set of KYB gr2s front and rear and the eibach prokit. all the mounting hardware is included (EVERYTHING IS BRAND NEW). i have read mixed reviews that the gr2's dont do well with a lowering spring, is that the case?. im not going to the track or racing, just daily driving that is all( highway and city). will this combo be alright? my suspension now is shot and i need to get this taken care of before i get back to school in 2 weeks. also will my car be able have a proper alignment or will i need to buy new camber control arms in the rear. if anyone has any recomendations i would greatly appreciate the help. thanks for you time,

Matt
 
Well, I'm 2G but I've had the same setup for about 2 years now and I've loved it since the day I did it because I didn't want an extreme drop. I think that once you don't go lower than that on GR-2's then you'll be fine.

Edit: By the way how much is it costing you?
 
I have been running the same setup for several years and have no issues at all. The gr2 works fine with the prokit but if you go with springs any lower, the gr2's will bottom out and kill them. Make sure that you cut the bumpstops according to eibach installation instructions and it will ride fine.
 
thanks for the replys. well thats some reasurance atleast.. i would not go any lower the the prokit because it doesnt make any sense for me to do that. upstate ny has bad winters and some terrible roads .im not going to do the install myself since i have never done that type of work before. im sure its not to difficult but i have a friend that works at a good shop that i take my car to. i will advice them to cut the bumpstops(what is the reason for this?). im getting the whole package for a little over $450. so i think its a good deal. what do you think?
 
anyone know where to buy new bumpstops? My car lacks them, and Im considering the prokit as well.
 
tstkl said:
anyone know where to buy new bumpstops? My car lacks them, and Im considering the prokit as well.

I purchased my new bumpstops from kyb when I got the shocks. A local auto supplier keeps them in stock so I didnt have to search for them.
 
airkingmt said:
im getting the whole package for a little over $450. so i think its a good deal. what do you think?

You my friend is being ripped off by your own friend:notgood: . I thought you were gonna say like $300 for the whole setup because you said you were getting a deal. By the way is it brand new or used?

This setup on ebay is much cheaper, I'll advise you to go this route and if you don't have an ebay account then get one. There's no need to spend extra money.

Here are the spings for $220 shipped.
http://cgi.ebay.com/ebaymotors/Eiba...hZ019QQitemZ8050092202QQrdZ1QQsspagenameZWD1V

And the shocks for $170 shipped
http://cgi.ebay.com/ebaymotors/KYB-...tegoryZ33590QQihZ010QQitemZ200015831823QQrdZ1
 
RWKustoms said:
You my friend is being ripped off by your own friend:notgood: . I thought you were gonna say like $300 for the whole setup because you said you were getting a deal. By the way is it brand new or used?

This setup on ebay is much cheaper, I'll advise you to go this route and if you don't have an ebay account then get one. There's no need to spend extra money.

Here are the spings for $220 shipped.
http://cgi.ebay.com/ebaymotors/Eiba...hZ019QQitemZ8050092202QQrdZ1QQsspagenameZWD1V

And the shocks for $170 shipped
http://cgi.ebay.com/ebaymotors/KYB-...tegoryZ33590QQihZ010QQitemZ200015831823QQrdZ1



well i dont think its that bad a deal. first off 450 has all the hardware. its brand new everything. my friend works at advanced autoparts and hes getting me 20%off and i will have it in 3days so i can have it installed on friday. time is an issue here. because i have to go back to school and learn! if i had to wait to get the stuff ground shipped from california i would be waiting a lot longer, i dont really feel like staying home any longer than i have to.

the site you gave me
eibachs=220+ kyb's=170
$390 plus all the hardware would be about $430 for the total set

so yeah its not as cheap but it would be quicker ordering through my buddy. i can have the parts sooner and get them installed that much quicker. id rather spend an extra 20 bucks to have it all come at the same time. thanks for your imput RWKustoms . but unless i find a drastically cheaper price for a complete new set. i will go with my buddy.
 
RamenPride said:
$450 for used Pro-Kits and GR-2's is a ripoff

i would not buy used suspension for that price. obviously that would be a rip off. i should have clarified in the begining that it was all brand new. sorry for any confusion.
 
airkingmt said:
i would not buy used suspension for that price. obviously that would be a rip off. i should have clarified in the begining that it was all brand new. sorry for any confusion.

For some reason I just assumed the setup was used. If the stuff is new, it isn't that bad of a deal.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2G Mishimoto Radiator & Fan Shroud
    2G Mishimoto Radiator & Fan Shroud $200 + shipping and paypal feesYou must be registered to...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G Power Window Switches ( tested and hardware included )
    2G Power Window Switches $55 + shipping and paypal fees* Tested 6/2/26 * Hardware included *...
    • jersygsx
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale Garage clean out
    Changing setups on the car and getting rid of some stuff as well that's been laying around. Will...
    • 92GSXtacy
    • Updated:
    • Expires
Back
Top