injen intake problem

[autornr]

i recently bought a 95 gst with a HKS ssq installed and a injen intake. My problem is and i know already is that I'm venting to the atmosphere duh i know problems i need to get the recirculate kit. OK now my problem the injen intake DOES NOT have the little pipe coming out for me to hook up the recirc. hose to it. Now am i gonna have to shell out some bucks for another injen or is there any way to recirc my air back. I cant believe the previous owner had it like this

 

[SkinnyBAM]

if your short on money just go with a cheaper piping like this one http://machv.com/casalinpip95.html and keep the air filter that came with the Injen
or if your not willing to spend that much go on ebay and look for some piping with a bung for the return hose. only problem with those are they probably wont be 3'

 

[CHnKTSi]

most ebay is 2.5 inch but some are 3 inches.
what you can also do is just modify the pipe you have.
if you know somewhere who can do aluminum welding, than weld a bung on the injen pipe. that is if you don't mind messing up the nice injen pipe. or just mod the car to use open vent and use stock one meanwhile.

 

[SkyLineGtR-R34]

like CHnKTSi said
you can custom make your own connection for the recirculation hose
just drill a hole and weld a piece of pipe size of the hose, polish it out and there ya go

 

[Amazin' Wasian]

I'm pretty sure the injen intake is aluminum, so why don't you just go buy a little piece of aluminum pipe and cut a hole into the intake and have some one weld them together.

 

[autornr]

thanx im going to just have the bung welded on

 

[GST98BIG16G]

same problem , but where do i get the aluminum pipe to weld into the intake?

 

[Salg320]

I just got this done to my car too. I found a factory here that just sold piping and asked for an aluminum pipe. I looked it up in the yellow pages. the piping needs to be 2 1/4in in diameter and about 4in long that way you can weld it easier. the pipe should only be like 5 to 10 bucks.

 

[GST98BIG16G]

2 1/4 why so large in diameter? I have HKS ssq with recirculation fitting...