Beckholt99GSX
10+ Year Contributor
- 43
- 0
- Feb 16, 2010
-
Mount Vernon,
Ohio
So I sent full blown an email, twice now, asking them for the wiring instructions for the 2g AWD hanger they sell.....and I have received no response in over a week. So I was wondering if anyone. Had them to post or PM to me.
I have a pretty good idea of the wiring but just want to be certain before i start cutting and splicing.
I understand that the two red and two blacks wires are for the positive and negative of the pumps- do those have to be spliced into the power source from the original connector on the harness?
The other three wires are purple, blue and yellow. Very similar to the wires coming from the fuel level indicator, I believe they are pink, yellowish and black- do those wires need to be spliced together inside the hanger, and then also externally with the factory connector in the wiring harness?
Any help would be greatly appreciated guys!!
I have a pretty good idea of the wiring but just want to be certain before i start cutting and splicing.
I understand that the two red and two blacks wires are for the positive and negative of the pumps- do those have to be spliced into the power source from the original connector on the harness?
The other three wires are purple, blue and yellow. Very similar to the wires coming from the fuel level indicator, I believe they are pink, yellowish and black- do those wires need to be spliced together inside the hanger, and then also externally with the factory connector in the wiring harness?
Any help would be greatly appreciated guys!!
