The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

help with faster takeoff.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

joshrww

10+ Year Contributor
56
0
Mar 6, 2010
conway, Arkansas
ok well like a few of you know i have a few dsm's i just picked up my 3rd dsm a 95 gsx with a few mods on it (fmic, evo3 ) and a few others i took the fmic and put it on my 95 tsi ( automatic ) while i can feel a difference in my performance i still have slow take off.. with the fmic and my other mods i can tell that my mid and high rpm pulls arelonger and more power in them.. i just want to get my take off a litter better! any ideas ?
 

Attachments

You must be registered for see attachments list
well you gotta figure with the evo3 you wont start boosting till 3500. even after boost, if you have boost leaks it will cause your car to accelerate slow. Also, I see you have no fuel upgrades so unless you have a ported out system, I dont see how your not hitting fuel cut. Maybe you dont have enough air getting into your system. And now that I look at it, it looks like you have your stock air intake setup. Id ditch that right away and get a aftermarket one.
 
ok I'm running stock fpr but the injectors are 750's and i have a walbro 255 im running 14psi atm.. ### i don't trust the mbc. as for fuel cut no im not hitting any fuel cut the car runs strong and from my boost gauge it don't look like im getting any boost leak i hold good boost at 14psi.
 
ok I'm running stock fpr but the injectors are 750's and i have a walbro 255 im running 14psi atm.. ### i don't trust the mbc. as for fuel cut no im not hitting any fuel cut the car runs strong and from my boost gauge it don't look like im getting any boost leak i hold good boost at 14psi.
Fuel control? I would think you're running stoopid rich.
 
well i dont think i am i mean my widband and fast controller is being used and reads out good and i said stock but my fpr is off an evo ( so stockish)
 
Im sure you could use tuning software to lean it out alittle, it helped me quite a bit even with my stock injectors

I have the Moates Ostrich, its a cheap alternative to DSMLink and it works pretty well.

I like TunerPro software as well, makes playing with maps fairly easy
 
You could use more boost. Also check for all boost leaks and you could retard the timing a couple degrees. It can help you spool a little faster brake boosting for sure works. A ball baring mbc will help spool up on the auto.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g 2G AWD Rear Knuckle Set
    2G AWD Rear Knuckle Set $230 + shipping and paypal fees* these are out of 2GB so you get a...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Front Knuckle Set
    2G GSX/GST Front Knuckle Set $150 + shipping and paypal fees* on the L side Knuckle the little...
    • jersygsx
    • Updated:
    • Expires
  • Wanted Looking for an Evo 3 16g
    Anybody selling one let me know. Tried ebay and its all knock offs
    • heresjimmy42
    • Updated:
    • Expires
  • For sale 1g 1990 STM shifter base bushings
    1G 1990 STM shifter base bushings.
    • drich970
    • Updated:
    • Expires
  • For sale 1g 1G Radium fuel rail
    1G Radium fuel rail with built in FPR -8an feed and return
    • drich970
    • Updated:
    • Expires
Back
Top