help on oem intercooler install

[chadkassinger]

OK so I got my new OEM intercooler coming in tommoro the old intercooler was just rigged up wit h would exsplain why it fell off and got ran over. I have searched google and could find an awnser to my question. My question is how and what is the best way to re-install the new OEM intercooler? Thanks for the help

 

[bryanwheat]

Bolt it into its original position.

 

[Kyle's_91TsiAWD]

it should be pretty straight forward. Just look at the brackets on the intercooler and put it in place. it will only go one way.

 

[chadkassinger]

Bolt it into its original position.

The car was wrecked when I got it so the intercooler was just zip tied up . This I'd my first eclipse so does it bolt to the fender or the bumper?

 

[bryanwheat]

The car was wrecked when I got it so the intercooler was just zip tied up . This I'd my first eclipse so does it bolt to the fender or the bumper?

It bolte to the inner fender/frame rail. It you jus put it up in its are you will see the holes.

 

[RamenPride]

Three bolts, should be easy to figure out....

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[chadkassinger]

Alright man thanks

 

[chadkassinger]

Just curios is there a specific inlet outlet

 

[Dsmkauai]

It's only going to fit one way bro. The bottom goes to turbo outlet and top goes to intake.

 

[josh408]

Only goes one way. I believe the curved part of the IC pipe go up through the hole in the engine bay and connects to the upper intercooler pipe. The straight side is to the turbo.