khartley
15+ Year Contributor
- 1,235
- 2
- Jul 20, 2004
-
Faith,
South_Dakota
I am fulling building this motor. I have Comp serious street cams (250/251) with hks gears, and a 2.3 bottom end. I have a huge FMIC if that makes any difference, all my mods are in my profile.
Dyno time is out of the question, the nearest AWD dyno is a state away.. about a 6 hour drive, and I guess I don't trust the car to get me that far. Wyoming sucks
Comp grinds all their cams to be 4 degrees advanced, according to their paperwork.
I also read that I could use my stock cams with a 2.4 crank by messing with timing a bit.
Anyone have any info or suggestions, links, personal experience, or anything to help me out? Thanks.
Dyno time is out of the question, the nearest AWD dyno is a state away.. about a 6 hour drive, and I guess I don't trust the car to get me that far. Wyoming sucks
Comp grinds all their cams to be 4 degrees advanced, according to their paperwork.
I also read that I could use my stock cams with a 2.4 crank by messing with timing a bit.
Anyone have any info or suggestions, links, personal experience, or anything to help me out? Thanks.