headbolt pattern and torque

[jmiltown]

were can i finf the proper pattern to tighten the headbolts down, and the proper torque specs for a 95 nonturbo eclipse

thanks
guys

 

[selmerguy]

in a haynes or chilton manual.

 

[opie1]

do not go of of the manual there has been an updated head torque for our heads and the go like this. WHEN BUYING A HEAD GASKET FROM THE DEALER!!!!!!!!!!!!

step 1 torque all center bolts to 25ft\lbs
torque 4 corner bolts to 20 ft\lbs

step 2 torque all center bolts to 50 ft\lbs
torque 4 corner bolts to 35 ft\lbs

step 3 same as step 2 centers and corners

step 4 in sequence give all head bolts a 1\4 turn


head torquing sequence as follows

CYLINDER HEAD
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

10 6 2 3 7












9 5 1 4 8
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||