Halo installation

[DxmaSonxM]

So the headlights i curently have are all wierd in. But the halos are not and i have no idea where to wire them into. I want to be able to push the fog light button and have them come on. Any help would be nice. I can send pictures of it. The guy who ownd this care before me did a real hack job to the wires down there.

 

[gudz519]

your best best is to splice them into the same power source as your fogs so that when you hit that button they will both activate some pics would be nice

 

[and1chewy]

I agree just run the wires right down to the fog light u can wire taps (prob the red due to the low gauge wire. Prefered choice would be solder as alway make the best connection. Good luck.

 

[Pitbull2o08]

same thing i'm going to do when i buy halos. i just can't find any that have red halos. I'm gonna wire them into my fog light switch since my fogs were removed for my big fmic.

 

[Aceman]

I had mine wired to the bumper corner lights so I could have them on without the fogs. Then I did the fog light mod so I could have the fogs and halos on without the driving lights. I gotta picture in my gallery of it, super clean lookin.

 

[psx]

If you want to run the halos of the fogs. Its really easy you just need a relay and inline fuse for it. Maybe a couple feet of 12awg wire.

1. ground both halos to frames
2. join the 2 positive wires from both halos into one 1
3. run that into the 87 on the relay
4. splice into the positive (i think blue) wire on the foglights (doesnt matter which one L or R )
5. run a wire from the splice into 86 on relay
6. ground the relay to the frame (its 85)
7. now run a length of wire with a inline fuse to the positive side of battery.

<a target='_blank' title='ImageShack - Image And Video Hosting' href='http://img293.imageshack.us/i/diagram.jpg/'><img src='http://img293.imageshack.us/img293/3949/diagram.jpg' border='0'/></a>

Uploaded with <a target='_blank' href='http://imageshack.us'>ImageShack.us</a>