The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Grrrrr not starting 2g

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wickedz

10+ Year Contributor
736
5
Dec 12, 2009
Madison, Wisconsin
95 tsi fwd 5spd.

So I took motor apart to do all the maintenance. Well we tested signal from crank and cam sensor, power through my C.O.P. But im thinking no spark. Timing is dead on. Any ideas? I checked fuses and all :(
 
Cranks no start as I said above. Im getting power and ground to my coils and cas and crank.
 
Which coils are you using? You may have a dead one or you may need a signal amplifier to run that type of COP. Try to plug in a coil pack and some wires and see if it starts.
 
Coolant switch replaced because mine broke

yes I did the ground strap from firewall to int&ke

Firing order should be ok, its cop off a running 2g
 
Getting spark now. Cranks no start. Sounds like its firing on exhaust side, because its poping

Anyone? I rotated motor over by hand, and timing still dead on. Pulled my ecu, and it looks good. Im lost
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top