The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Greddy Type S or HKS BOV?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TurboAWDKID

15+ Year Contributor
91
1
May 24, 2004
Cuyahoga Falls, Ohio
I have a 90 TSi AWD and right now it is mostly stock except for the 3" turbo- back exhaust. I was wondering which BOV to switch to, Greddy or HKS? I've looked into them both a little but half the people I talk to say Greddy, the others HKS. Right now I'm venting to the atmosphere and I know thats not great to do, but I love the sound(going to route back to intake tomorrow as it drives poorly). Anyway, any suggestions from the pros out there on which BOV to go with?(I'm only 17 and money is kinda tight, but luckly it goes right into my car ;) :cool: .
 
A trouble free BOV would be the HKS/Tial. If you want problems in the future, buy the Greedy, TurboXS.
 
Hks soloved my idle problems, boost creep, and I ran it vented perfectly fine...

and it sounds so extremly P.I.M.P. :D
 
"Today 01:05 PM
Tallen A trouble free BOV would be the HKS/Tial. If you want problems in the future, buy the Greedy, TurboXS
"

what problems does the greddy give in the future????
 
HKS if you want your car to act up and run poorly. Sence your going to reroute your bov back to the intake go with the GReddy.

I had a HKS on my car at first and I would always stall out.......and im A/T. You wont be dissapointed with the GReddy.
 
Tallen said:
A trouble free BOV would be the HKS/Tial. If you want problems in the future, buy the Greedy, TurboXS.

^^^ Dont listen to this guy. Nothing is trouble free in this world and please enlighten me on the "problems" the greddy bov has.
 
96TSi_Chris said:
IMO the greddy sounds the best recirc. and is crazy loud vented.

Sorry for thread jacking, whats the difference between loud and vented? One better than the other?
 
96TSi_Chris said:
^^^ Dont listen to this guy. Nothing is trouble free in this world and please enlighten me on the "problems" the greddy bov has.
That's what I was thinking. I have a GReddy BOV, and it's great! I've heard numorous problems with the HKS on a DSM. Some shops that sell them will recomend that you don't even buy one. Greddy sucks! Riiight... :rolleyes: Oh, and for the record: I'm not saying the HKS BOV is bad.
 
Ive had an HKS for about a year and its perfectly fine.Loud even with the recirculation kit.The downside is the HKS is a PITA to put on your stock Upper IC pipe,and also if you do plan on getting a Front Mount in the future its alot easier to buy the greddy type s along with the greddy piping and greddy core,where as with the HKS you'll have to get an upper IC pipe seperately flanged for it
 
tweekerz said:
Sorry for thread jacking, whats the difference between loud and vented? One better than the other?
He means when you re-circulate the Greddy back into the intake pipe, it still sounds good; however, it is even louder when you vent it into the atmosphere.
 
Ok, so the majority of you would go with the GReddy and not the HKS due to so called problems, correct? So I venture to guess that they both sound the same but you pay less for the GReddy then the HKS and you also dont run into problems? Sounds like I'm goin with the GReddy :thumb:
 
People say the GReddy Type-S diaphram goes out over time. However, the cases are far and few between. The only problem you may encounter with the Type-S, is if you upgrade to a large turbo down the road and run some serious boost as the Type-S seems to hold well until around 22-24psi. Of all the BOV's I have heard, this one is the loudest BOV when recirculated.

HKS is a great performance BOV. The push/pull design valve is virtually leak proof and is a great BOV to vent, even for those who choose to do so with the stock MAS. The super sequential has been proven to hold some serious boost pressure. This is the loudest BOV vented next to the Tial BOV.

I had both of them and was happy with both of them. When I am in the market for one again, and if I were nailed down to these two again, I would choose the HKS SSQV. Both BOV's are great choices. I guess you'll need to evaluate your goals, then choose which is best for you.
 
i have a hks vented and no problems here. buddy of mine had the greddy and it broke on him in a year. he now has a tial.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 3 inch Magnaflow SS high flow cat
    3 inch Magnaflow stainless cat. High flow. 18.25 inches. Flange holes are 4 1/8 center. Has...
    • Galant665
    • Updated:
  • For sale 4G63 Forge Motorsports BOV
    Original Forge Motorsports bov. Adjustable with over 80 clicks on the dial. Nice to use for...
    • Galant665
    • Updated:
  • Wanted 1g 1991 Black Cherry Eagle Talon
    5-speed
    • bamatalon
    • Updated:
    • Expires
  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
Back
Top