Gas tank diagrams

[kidmet]

Doing an AWD swap on a spyder. 1998. Donor was a 1995. Anyone have the diagrams of all houses for both? Had a spare hose and what seemed to be a home for it, but it may be leaking and now I'm wondering if I hooked it up right. Emissions CEL. I'm changing ECU to a 95 today to see if that makes a difference. Car runs fine.

 

[kidmet]

Also, if I put the 95 ecu in, do i need to do anything else? Got it in but she wouldn't start.

 

[kidmet]

Never mind. Inverted CAS signal.

Also, if I put the 95 ecu in, do i need to do anything else? Got it in but she wouldn't start.

 

[kidmet]

Nobody? Really need help. Took car for emissions and passed everything but had slightly high HC. Passed before gas tank, ECU, and exhaust swap. ECU also doesn't seem to be resetting the emissions. I'm curious if the ECU is faulty and just running the car lean because its not getting O2 readings?

I have a pcv valve and iac on the way to try to replace.

Old 98 ECU is blackbox.

Everything is stock.

Last thought. Since the 98 evap canister is supposed to be in/on the gas tank (I think). And 95 is under the battery, I probably have no evap canister. Can I get a 95 evap canister and set it up on my 98 setup now? Would this cause slightly high HC?

 

[Kryndon]

There are two different style filler necks (and the adjacent breather/emissions pipes. This diagram shows both, maybe you can use that to compare to yours and see if everything is hooked up right.

You must be logged in to view this image or video.

 

[kidmet]

There are two different style filler necks (and the adjacent breather/emissions pipes. This diagram shows both, maybe you can use that to compare to yours and see if everything is hooked up right.

You must be logged in to view this image or video.

Perfect! I found a couple others last night too. Now just need to figure out if I'm going to try to find a 98 gsx tank with canister or try to plumb in the 95 style. Or neither. I was .12 off on HC.