Full Spool on 16g???

[domenico_169]

what rpm roughly should my small 16g be at full boost?

 

[90AWDTalon]

On my car depending on the gear, I hit 20psi at 2500-2700rpm's. But it depends alot on your mods. I put the 16g on when everything else was stock and was hitting 14psi at a little over 3000rpm's.

 

[Slappster]

Originally posted by 90AWDTalon
On my car depending on the gear, I hit 20psi at 2500-2700rpm's. But it depends alot on your mods. I put the 16g on when everything else was stock and was hitting 14psi at a little over 3000rpm's.

Bingo!

 

[1LE]

I hit full boost (14psi) at about 3200. 9.1:1 compression, ported everything, HKS 264/264 cams...

 

[domenico_169]

k i read up a little, and it i feel i have the supporting mods, but it seems like since i put my maf and translator in i have slower spool...?? whats up with this? all my dials are set at 0 right now on my translator.

 

[90AWDTalon]

When I added my maft, it made a huge difference in spool. The two possibilities I can think of are; boost leak, or tuning.

 

[domenico_169]

well one or the other, it takes me until 4000 to hit 15 psi