Front Suspension & Ball Joint kit from Ebay

[JeanDSM]

Im about to buy this kit, it includes all the front suspension ball joints and upper and lower control arms. Looking for feedback on buying this from EBay


Ball Joint Tie Rod End SUSPENSION Eagle Talon 95-98 : eBay Motors (item 300407598359 end time Apr-15-10 07:56:14 PDT)

thanks

 

[Grimey]

The price looks nice to me. I checked the price against purchasing the parts individually from Autozone Commercial and the Ebay price is still better. The seller has a high positive feedback and if you use Paypal you're protected so I would jump on these. Good luck.

 

[PieEyedPiper]

Don't. The tie rods exploded their boots in 1 week. And the compression arms boots cracked (still holding) in 2 months. It's a headache.

 

[psycho]

There's a thread with part numbers for suspension "kits" (lateral arm, compression arm and knuckle). When I bought mine, I spent ~$75 for each side.

Yes, that's $75 for a lateral arm, compression arm and a new knuckle. I ordered both side and with shipping it was around $200.

And everything is OEM, from Mitsubishi.

 

[spdtuned]

That's a pretty good price! Care to point us in the right direction of that thread? All the prices I've seen are about 2x that.

There's a thread with part numbers for suspension "kits" (lateral arm, compression arm and knuckle). When I bought mine, I spent ~$75 for each side.

Yes, that's $75 for a lateral arm, compression arm and a new knuckle. I ordered both side and with shipping it was around $200.

And everything is OEM, from Mitsubishi.

 

[DSM_PWR]

^^^
x3 on that

 

[kyouichiGST]

There's a thread with part numbers for suspension "kits" (lateral arm, compression arm and knuckle). When I bought mine, I spent ~$75 for each side.

Yes, that's $75 for a lateral arm, compression arm and a new knuckle. I ordered both side and with shipping it was around $200.

And everything is OEM, from Mitsubishi.

where is this magic thread and in what forum?

 

[turbosax2]

http://www.dsmtuners.com/forums/handling-tech/323990-resolved-oem-knuckle-control-arm-question.html

Part numbers are:
MR325009
MR325010

 

[Thomas91169]

http://www.dsmtuners.com/forums/handling-tech/323990-resolved-oem-knuckle-control-arm-question.html

Part numbers are:
MR325009
MR325010

This is for GST as well?

just checking.

 

[turbosax2]

Yup.