First thing first. THIs is my first how to article so please be patient.
things needed
-1 blade fuse holder
-1 blade fuse(15amp) or higher. not recomended
- 10 to 15 inches of wire
Procedure
1.Pop your hood and open your fuse box.Using the of the fuse box locate the fog light relay and the tail lamps fuse.
2.get you fuse holder and put at least 5 inches of wire on each side
3.remove your tail lamp fuse and attachone either side of your wire to either leg. the remaining wire goes to you fog light relay in the middle leg.(please make sure the wire only touches the middle leg)
4.reinstall your relay and fuse where they go and thats it.
pictures below speak for them selves, if u got any questions feel free to ask.will answer asap.
this was done on a 95 gsx. on 1g's ive not tried so shouldn't be attempted
Neither my person or DSMtuners will be held resposible if your car blows up.
[email protected]
things needed
-1 blade fuse holder
-1 blade fuse(15amp) or higher. not recomended
- 10 to 15 inches of wire
Procedure
1.Pop your hood and open your fuse box.Using the of the fuse box locate the fog light relay and the tail lamps fuse.
2.get you fuse holder and put at least 5 inches of wire on each side
3.remove your tail lamp fuse and attachone either side of your wire to either leg. the remaining wire goes to you fog light relay in the middle leg.(please make sure the wire only touches the middle leg)
4.reinstall your relay and fuse where they go and thats it.
pictures below speak for them selves, if u got any questions feel free to ask.will answer asap.
this was done on a 95 gsx. on 1g's ive not tried so shouldn't be attempted
Neither my person or DSMtuners will be held resposible if your car blows up.
[email protected]
