ECMlink First ever log, need advice

[1990AWD]

Hi, so I have just done a bunch of work on my car and this is a log from initial start-up.

Things I did recently:
ECMLink V3 full w/ SD bundle (GM IAT is on TB elbow, MAP is off IM)
Walbro 255HP re-wired, FIC 1000cc injectors, Aeromotive AFPR
Innovative LC-1 wideband with DB gauge
'91-94 TB with '91-94 TPS and ISC

Anything I'm missing? The car is running really rough and I really need my car running good this weekend. Thanks, Mike.

 

[Imback]

Your not going into closed loop and your temp does not go over 136 in that log. You need to capture more values. Press f10 and add your widband,stft,combinedFT,sdAirflowPerRev,gm iat,omni 4 bar,LTFT lo,mid,hi. That's all i can think of at the moment.

 

[hybrid1gt]

your airflow per rev is to high

 

[1990AWD]

Here is an updated log with all the items you requested.

How would I decrease my airflow per revs and why?

I'm completely new to tuning but really want to learn and get it right.

 

[1990AWD]

Here's the latest log. The car will barely start and will not keep running. ANY advice would be much appreciated! I really want my car running!

 

[BrokenTsi]

You forgot to re-assign the front o2 input on the ecu side to EGR temp.

This is DrewJ from ecmlink forums, BTW.

 

[1990AWD]

Just in case anyone here can help, I've been updating my thread on ECMLink.