Evo front brakes

[eighth]

i was wondering if i could install the calipers and rotors by just making a bracket for the calipers or do i have to get the galant knuckles to make it work.

 

[Dsm2go101]

When I installed them on my car I used the galant knuckles and it is a very easy swap. Brackets are possible but you will have to make sure the spacing is correct. Also if you are considering doing the brake conversion, it will change the offset that you will need. So you will need either wheel spacers or the correct offset wheels. The rears are bolt on and only require you to cut the dust shields.

 

[Hideki]

You'll need the knuckles, unless you have a lot of time on your hands to fab up some brackets. Patience is a virtue when it comes to this conversion, it's gonna take time to track down those knuckles. Also, when I did this conversion I needed to order EVO caliper bolts, the DSM ones wouldn't work.

 

[eighth]

what year and model galant do i need to get the knuckles from to install these brakes.

 

[crimsonGST]

JDM galant vr4 knuckles. Better hope you know someone in japan, because finding them stateside is near impossible.

 

[Defiant]

http://www.dsmtuners.com/forums/art.../260580-diy-install-evo-brakes-brembo-g2.html