evo crank in 1g 7 bolt

[etniesfaction]

hey i looked at some threads on dsmtuners about putting a evo crankshaft into a 1g 7 bolt motor...i brought my 1g 7 bolt block up to the machinist and the crank is bad...wil lthe evo crankshaft work..i would think so bc u can throw the evo rods/pistons into a 1g/2g 7 bolt so i need some insite here...

 

[zckry]

+1 would also like to know, I'm wondering if the different split thrust design would become a problem on the 1G 7-bolt blocks.

 

[etniesfaction]

there was some threads on here that the evo crank works in any 1g/2g 7 bolt block from 92.5-99... so i guess ill see what the machine shop says

 

[dsmconvict]

Chaz, the only thing i can see that may pose a problem is the evo 4g63 being backwards or whatever, take it to the machine shop and see what they say. But with evo rods and pistons fitting i cant see why the crank wouldnt work either. I cant help ya with this one but just my .02 cents. Was this Justin's old motor? I have a 6bolt that I BELIEVE has a good crank. Just keep in touch and let me know whats going on.

 

[4g64fiero]

Yes you can use it easily.

 

[RadDsm]

Its the same crank, so yes, it will work.

 

[SBR Joe]

Plain and simple, a 7 bolt crank is a 7 bolt crank. Whether its out of a 93 DSM or an 05 EVO, they are all the same and will work the same.

 

[SBR Joe]

+1 would also like to know, I'm wondering if the different split thrust design would become a problem on the 1G 7-bolt blocks.

That only has to do with the block itself, not the crank.

 

[etniesfaction]

ok guys thanks i appreciate everything i just never seen anyone think of using the crank until recently and wanted to know for sure itd work...thanks again for all responses