The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

dsmtuners license plate frame

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

They can fit with a small revision: The lower two holes in the frame - take the frame and match up the lower holes of the plate to the frame.

Take a marker and put a dot on the lower valance where the plate lays against the valance. Take a drill and make two, 1/8" small pilot holes into the valance where you put the dots.

Take wide head 1/2" phillips sheet metal screws and fasten down the lower part of plate and frame to the valance after you attached the upper part of the plate and frame.

It's not going anywhere...

EDIT: now these DSMTuner frames that have only the upper mounting holes: you can do the above but have to drill though the frame where the lower holes are located on the plate, then continue as above..

Now, you 1GB EAGLE owners that have the revised rear bumper cover where the plate is above the bumper line, I'm not sure if this mod above will work or not.

-DSM
 
Yeah right, you want me to drive the owners of Dodge Ram V10s and the F1 Lightings on Highway 30 Mad? They already go bonkers just at the sound of my exhaust.

I'll keep the true nature of the Talon restricted to the aficionados.
 
Last edited by a moderator:
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top