The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

driver side axle leak after tranny swap

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

waterd

Probationary Member
11
0
Apr 16, 2009
brooklyn park, Minnesota
ok so i did a auto to manual tranny swap. all is good but my driver side seal on the tranny is leaking. i tryed replacing the seal with a new one from the dealer. but it still leaks as soon as i fill it up. is there a differents in the hard shaft on the driver side from manual to auto. they look the same when put them next to each other but my old shaft from the automatic was in better shape. so i used my auto shaft. did i make a big mistake. it drives fine but it still leaks??
 
sound like the diameter of the shaft on the auto was smaller. Did you measure it.

according to the interchange book they are different. You will need the axle that came with the tranny
 
When I replaced my front axles, Checker asked if I had the auto, or 5 speed. So I'm guessing that they're different sizes. You don't want that leaking and still driving around on it. Last thing you want is to get some dirt or grease in that tranny, so get that other axle in there.

Also, BIG props for doing the switch! I thought about it, but don't have a donor car.
 
yea it ended up being that the auto shaft sealed at a different point then the manual. installed manual and no more leak.. thank you
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top