The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Decided on the outcome of the car

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dsm96rs

10+ Year Contributor
269
0
Oct 11, 2010
Glendale, Arizona
i have contantly been told to just sell my n/t and buy a gst or gsx. however! i have decided that i truly want to learn about turboing a car. so i have decided to "build" my turbo setup instead of "buying" one premade. i understand i will not be as quick as your gst and gsx guys but we all know i can still destroy on the streets against little v-tech honda people that pull up next to me. even my tubro 420 can destroy theirs unless they went all out already haha but what i saying is my boosted n/t will still be able to compete. right? haha of course its right. so i am going to boost my n/t and then possible still buy another gsx in future. ### i also want to rally the gsx you feel me? so yeah. woo turbo n/t project here i come :thumb:
 
but the thing is since i got scammed. nothing else is right. i will have to spend a good amount of money to even get it sale worthy. i will only make like 1500 if even that unfortunately
 
you know it too. haha vtec still cant always keep up with a turbo 420. they almost the same if i not a little bit better haha especaially after rebuild the internals. then i be kicking it up a bit
 
It would make a good project. It would be an even bigger project to make it reliable after that though. I say go for it. I was contemplating doing this to my old ESi, But i decided it would cost the same, if not be cheaper to just sell the ESi and buy a TSi. And it was, granted I got one with no engine, but half the miles. Oh well tho, I have a good winter project now tho. Good luck with it though man, I hope it goes well.
 
Are you going to forge the parts in the "Fires of Mount Doom, in Morridor" or get Gandalf to help?
 
420aNEWB;bt10484 said:
i got a tsudo N1 3 inch exhaust for the 420a NEW i sell for 150$ shipped let me know if you want...its a cat back
is that a 3" piping? and what's the muffler tip size? what it come with? can you put pics of it, if he don't want it, i want it:D
 
dsm96rs if you going to turbo that N/A its better to make your own turbo kit, well thats what i did and all i need is a wide band and a down pipe and i'm ready to kick some V-Tech a@&, good luck on your build.
 
Sadface at those taillights.

Don't give in to the bs floating around. Nothing wrong with wanting to learn things yourself. Just beware youre working with a less forgiving platform than the alternative.
 
ive seen lots of 420a turbo engines....there pretty quick...jz go to howellautomotive.com they have fast stuff for the 420a motors...my friends buys stuff from there all the time for his neon... i say go for it...:thumb:
 
i dont know why everyone is bagging on the 420a? It is more work to make reliable but there are plenty of people who have made decent power with the 420a platform. I had a 420a-t before my gsx and the only reason i sold it was because i wanted awd. dont listen to the haters, you can make good power with the 420a and you'll have something most people wont see anywhere else with the turbo'd 420a
 
thanks everyone. yeah i learned to just ignore the ignorant comments like "sell that shitbox now" *hint hint* i up for the challenge and like to enjoy the work i put in. so i will turbo it and then maybe just also buy another dsm already turboed and then drag that one. possibly a 1g ha idk why but for some reason i just want one. well lets see. thanks for the support and if you say retarded comments i just dont even bother to care.
 
bNasty;bt10468 said:
you can build your own turbo kit with a gst or a gsx too
bnasty love it haha dude I know a vtec that will make a 420a look like a neon and not an srt. Lol just swap a 4g63T 6bolt in it and start from there. Why tune a 420a when a 4g63t will swap right in??????
 
boosted ghost;bt10532 said:
bnasty love it haha dude I know a vtec that will make a 420a look like a neon and not an srt. Lol just swap a 4g63T 6bolt in it and start from there. Why tune a 420a when a 4g63t will swap right in??????


ohh really are you sure about the 6 bolt swapping right in? looks like you don't know much.
 
boosted ghost;bt10532 said:
bnasty love it haha dude I know a vtec that will make a 420a look like a neon and not an srt. Lol just swap a 4g63T 6bolt in it and start from there. Why tune a 420a when a 4g63t will swap right in??????

WOW WOW WOW WOW!!!!!!!!!!!!!!!!!

I hope your just saying that not knowing anything about the 420a's and how they are mounted totally different than the 4G63's are.

If your serious on that comment I sure hope you don't work one your own DSM and put it threw that type of shame and pain!

This one is going in the DUMBEST THINGS thread. LOL.
 
Years ago I new a guy who had an old american motors car maybe a javalin or gremlin(so long ago I don't remember) we all though the car was a POS until he started running low 10's high 9's. Well the laugh was on us. Goes to show you with enough time and money anything can fly.Good luck to you hope it works
 
wow someone here is not the smartest person in the dsm world "a 6bolt will swap right it" hahahhaha makes me laugh. but exactly. enough time and will into and that vtech will like the flinestones
 
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g 2G parts
    2G parts2G ignition, door locks, glove box and hatch( hatch lock doesn’t turn) comes with 1...
    • Dsm_canadian_mike
    • Updated:
    • Expires
  • For sale 2g 2G harnesses
    2G harnesses2G 97-99 under dash wiring harness MR225461 $502G front Chassis wiring harness...
    • Dsm_canadian_mike
    • Updated:
    • Expires
  • For sale 2g 1998 DSM FWD Fuel Tank
    Clean 1998 FWD DSM fuel tank
    • kyler021
    • Updated:
  • For sale 4G63 Antilag coil on plug, m&w ignition box, wilson Billet 90mm throttle body,
    I’m upgrading to fuel tech so I won’t have used for these parts I’m in the middle of a build and...
    • aguiga
    • Updated:
    • Expires
  • Wanted 1G Fuel pressure / 2G boost solenoid
    Looking for a working 1G fuel pressure solenoid. Same part was used as a boost control solenoid...
    • Drewpy Dawg
    • Updated:
    • Expires
Back
Top