The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

DEC/JAN meet for the bay

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Status
Not open for further replies.

98eclipseRS

20+ Year Contributor
2,850
38
Jan 1, 2003
NORCAL, California
Well I think it has been long enough since the last meet we had so here goes my attempt at another one. I realize it will most likely be raining so I have planned acordingly, don't worry. So here's the deal, I have wanted to go go-karting for a while now so that's what we are doing. No ifs and or buts if you don't want to do it, don't go and DON'T TELL ME ABOUT IT BECAUSE I DON'T CARE. The meet will be at the go-kart racer in burligame right off 101. Around midday and I am thinking to have it the weekend before or after christmas. Last time I tried this meet I got the shaft because everyone said they were comming and noone came SO IF YOU ARE NOT GOING TO MAKE IT DON'T SAY YOU ARE OR I WILL PERSONALY HUNT YOU DOWN AND KILL YOU. Have a nice day.
 
Plan for after Christmas, and I will do my best to show up.

How much is it to run Zach?
 
Depends on what day we have it. If I'm available, I'll definitely go. I've been to RPM in Sacramento, and that was tight.
 
hey zack, i would rather go on a run. and i dont care that you dont care. i need a gm maft setup, see if u can locate one for me, as well as a 2g o2 and some injectors again. oh and a 16g while you're at it. i might be down to go karting though. hit me up sometime
 
Hey! where the heck have u been? It's been a while, I was wondering if the meet is already dead or what. Anyway let's see if the date will coinside I may or may not make it. Alright see you soon!
 
Dwnshft said:
Hey! where the heck have u been? It's been a while, I was wondering if the meet is already dead or what. Anyway let's see if the date will coinside I may or may not make it. Alright see you soon!


Ive been hiding out, haha no just super busy with work and everything else that I have been doing lately. Don't worry about meets being dead as long as I am around we will have some meets that's for sure.

unlmtdndeavor said:
hey zack, i would rather go on a run. and i dont care that you dont care. i need a gm maft setup, see if u can locate one for me, as well as a 2g o2 and some injectors again. oh and a 16g while you're at it. i might be down to go karting though. hit me up sometime

Hey, well I don't care that you don't care, that I don't care. <-I think that makes sense :confused:. what you mean injectors what happened to the ones I sold you? Was that one really that burned up? I think I know someone selling an 18g if that interests you?? I would hvae a run or a track day or something but the chances of it raining on the meet day are too high so I figured I would do something that will be safe ragardless of the weather. Hell I would be down to do a rain run through the mountains but I don't fell like pulling nobody out of any ditches along the way.


Well the meet will be on SATURDAY JANUARY 7TH AT 2PM
 
unlmtdndeavor said:
hey zack, i would rather go on a run. and i dont care that you dont care. i need a gm maft setup, see if u can locate one for me, as well as a 2g o2 and some injectors again. oh and a 16g while you're at it. i might be down to go karting though. hit me up sometime

In case you might be interested, I have some Denso 660s that were only used for a few thousand miles.
 
DSMantledYou said:
In case you might be interested, I have some Denso 660s that were only used for a few thousand miles.
i had a set of denso's 660 that got fouled when the tips got melted due to a fuel fire in the engine bay. i don't have eprom, and i had a hard time tuning them with just a safc. i am getting a gm maft setup, would it be enough in conjunction with a safc to compensate for the 660's
 
unlmtdndeavor said:
i had a set of denso's 660 that got fouled when the tips got melted due to a fuel fire in the engine bay. i don't have eprom, and i had a hard time tuning them with just a safc. i am getting a gm maft setup, would it be enough in conjunction with a safc to compensate for the 660's


yes, with the gm maft you can set the translator to accomodate anysize injector and it will drive stock. I had the injectors I sold you in my car with the gm maft before I had my afc and everything worked out great.
 
how much do you want for the denso's. i had bought a set of zack for a fairly cheap price and dont wanna pay too much.
 
unlmtdndeavor said:
how much do you want for the denso's. i had bought a set of zack for a fairly cheap price and dont wanna pay too much.


Haha I spoil the locals man that's bad ROFL So since this thread is going OT does anyone want to buy my car or know anyone that wants to buy my car??? I have decided to say #### it and am going to try and buy a supra.


P.S. - I'm not joking!

P.S.S.- really i'm not.
 
u just got done building it too. i wish i had the funds to build something like that zack. why not wait till u hit 11's and then sell it. that car has the power for it.
 
unlmtdndeavor said:
u just got done building it too. i wish i had the funds to build something like that zack. why not wait till u hit 11's and then sell it. that car has the power for it.


Well i've been trying to get back on the site since I posted but the other option was if anyone knew of a 2g awd with a blown engine so that I could do an awd swap then I would keep it.
 
98eclipseRS said:
Well the meet will be on SATURDAY JANUARY 7TH AT 2PM

I think thats the day of CMI winter warm-ups. If anyone wants to run at a track. I think weather comes into play for that though.
 
unlmtdndeavor said:
how much do you want for the denso's. i had bought a set of zack for a fairly cheap price and dont wanna pay too much.

I bought them from Road Race Engineering for $390. I don't have any spare O-rings or rubber spacers between the injector tops and fuel rails.

I'd say, $280.
 
DSMantledYou said:
I bought them from Road Race Engineering for $390. I don't have any spare O-rings or rubber spacers between the injector tops and fuel rails.

I'd say, $280.
oh wow. thats pretty expensive. i paid about 1/3 of the price for mine. thanks anyways
 
98eclipseRS said:
Ive been hiding out, haha no just super busy with work and everything else that I have been doing lately. Don't worry about meets being dead as long as I am around we will have some meets that's for sure.



Hey, well I don't care that you don't care, that I don't care. <-I think that makes sense :confused:. what you mean injectors what happened to the ones I sold you? Was that one really that burned up? I think I know someone selling an 18g if that interests you?? I would hvae a run or a track day or something but the chances of it raining on the meet day are too high so I figured I would do something that will be safe ragardless of the weather. Hell I would be down to do a rain run through the mountains but I don't fell like pulling nobody out of any ditches along the way.


Well the meet will be on SATURDAY JANUARY 7TH AT 2PM


Is this a go for that date?
 
What is it with Bay Area DSMers? I showed up to that Tapioca express meet and saw 1 DSM. I invited folks to Sacramento Raceway, and got like 3 replies. Now this...

BORING :|
 
let me know if its a for sure thing. if it is i will show up. if anyone is looking to meet for a weekend thing sorta spur of the moment in the bay area til then pm me or call my cell (559-679-9363). I'm always available to roll somewhere.

and you all can check out my 1GA projectors :cool:
 
So am I going to be the only dsmer to show up to tthis thing??? come on dummies even if we don't go karting let's meet up at an in and out or something so we can kick it.


I miss you guys :cry:




















SIKE!!!! for reals though let's all at least meet up.
 
Status
Not open for further replies.
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top