Check this carbon trim out~!!!!

[domestykvylence]

Here are a few that came up with a little tweaking to the google search:

http://www.phoenix-image.com

http://www.automotiveupgrades.com/custom.asp?id=47902&page=13&shopperid=

http://www.vipersbyelite.com/

Has anybody contacted any of these local guys? I looked through the phoenix site and they look pleny capable of doing it. Some of you more serious people should call them up before spending money on shipping stuff to Korea.

 

[Flat Tire]

yea, some one should e-mail that pic with all the parts and ask about cost...because $400 seems pretty high, and i really don't think i could justify spending $400 on spray on c-f look a like stuff

 

[EclipseGSX012]

yea, some one should e-mail that pic with all the parts and ask about cost...because $400 seems pretty high, and i really don't think i could justify spending $400 on spray on c-f look a like stuff

I emailed them and asked how much it would be if i want 17 piece CF. But they didnt get back to me yet. I'm guessing because Holiday weekend.

 

[domestykvylence]

Please post the response when you get it.

 

[EclipseGSX012]

Please post the response when you get it.

Yeah i will when i get the response from them.

 

[EclipseGSX012]

here is the quote guys.

"Dear Joe,

I do not stock factory parts for your vehicle, so you would need to send in your parts to be processed. If you would like a quote prior to sending in your parts, e-mail or call me with a list of the parts you want to have decorated along with their measurements (width of the part at the widest point by the height of the part at the tallest point, going over any curves). This process can be done to any hard-surfaced part, such as plastic or metal, as long as it can be dunked in water, and we offer a lifetime warranty against defects of manufacture. I guarantee the results will exceed your expectations!

This process gives you show-quality parts, and they’ve been responsible for a lot of vehicles winning awards at shows, have been featured on many covers and in articles of magazines, on television such as SpeedVision and ESPN, and have been featured in many celebrities’ vehicles. Every year we sponsor several vehicles for the SEMA show in Las Vegas; this past year, I think we had at least ten vehicles (that I know of) with our process done to them, including two in Ford Motor Company’s booth. We did an Escalade for Sony’s booth, which won GM’s award for best interior design, and the builder of the vehicle attributed that award in largest part to our work on the vehicle’s parts. GM only gives out nine design awards at the show a year, out of the thousands of show vehicles, and only one gets best interior design.

Thanks for your interest, and I look forward to hearing from you soon!"

So now i have to measure everything and send it to them to see how much it would cost. Or im going to use the picture and measure i guess. Anybody want to help?

 

[MaNGiNa24]

here is the quote guys.

"Dear Joe,

I do not stock factory parts for your vehicle, so you would need to send in your parts to be processed. If you would like a quote prior to sending in your parts, e-mail or call me with a list of the parts you want to have decorated along with their measurements (width of the part at the widest point by the height of the part at the tallest point, going over any curves). This process can be done to any hard-surfaced part, such as plastic or metal, as long as it can be dunked in water, and we offer a lifetime warranty against defects of manufacture. I guarantee the results will exceed your expectations!

This process gives you show-quality parts, and they’ve been responsible for a lot of vehicles winning awards at shows, have been featured on many covers and in articles of magazines, on television such as SpeedVision and ESPN, and have been featured in many celebrities’ vehicles. Every year we sponsor several vehicles for the SEMA show in Las Vegas; this past year, I think we had at least ten vehicles (that I know of) with our process done to them, including two in Ford Motor Company’s booth. We did an Escalade for Sony’s booth, which won GM’s award for best interior design, and the builder of the vehicle attributed that award in largest part to our work on the vehicle’s parts. GM only gives out nine design awards at the show a year, out of the thousands of show vehicles, and only one gets best interior design.

Thanks for your interest, and I look forward to hearing from you soon!"

So now i have to measure everything and send it to them to see how much it would cost. Or im going to use the picture and measure i guess. Anybody want to help?

Sooooooooooouuuunds expensive! Can't wait for the reply with a quote.

 

[EclipseGSX012]

Sooooooooooouuuunds expensive! Can't wait for the reply with a quote.

yeah it does when i get a chance ill measure everything out and send the measurment.

 

[domestykvylence]

Cant be as expensive as sending it sayto Korea?

 

[EclipseGSX012]

Cant be as expensive as sending it sayto Korea?

i dont know yet but i have to measure everything and send the measurment to them but i think it will be alot.

 

[EclipseGSX012]

just got a email from korea about the cf trims

if we get 10 cars done at once it will be $230
shipping is kind of expensive tho $100 bucks just one way and someone have to find out the shipping to korea. But i dont think it will be more than $50 dollor tho.

So total will be $380.

About the other place i got some measurement down but its not correct but i guess i'll email them and find out the quote too.

So if anybody is still interested let me know. I dont care if you guys do it or not i will anyways. But that is after i find out the price from the one in TX.

 

[nerfbars]

I am highly interested but only if a place in the US is willing to do it and there price isnt too crazy. I'd offer to help measure but my car is in the bodyshop. Thanks for persuing this for us.

 

[n2orbit]

your going to pay that much for soem fake cf parts? Alsa corp does it also.. they just dunk it in a waterlike solution and it come soutliek that WOW

 

[EclipseGSX012]

your going to pay that much for soem fake cf parts? Alsa corp does it also.. they just dunk it in a waterlike solution and it come soutliek that WOW

Lol would you rather pay like 170 dollor for cf plastic piece? i would rather spend extra money to get that done and make it look better than the cf piece.

 

[n2orbit]

who said anything about plastic carbon fiber??? i'm talking aboutthe real 100% carbonfiber.. like carbonwerks.. i have a bunch of his stuff and i'm sorry thoes parts wont looks anything like the real stuff or as good... and leo can custom make you anything you want for the $ i rather have the real product then a black peice of plastic with some siver painted squares on it

 

[EclipseGSX012]

who said anything about plastic carbon fiber??? i'm talking aboutthe real 100% carbonfiber.. like carbonwerks.. i have a bunch of his stuff and i'm sorry thoes parts wont looks anything like the real stuff or as good... and leo can custom make you anything you want for the $ i rather have the real product then a black peice of plastic with some siver painted squares on it

wateva man no point arguing... i dont feel like arguing with you and getting this thread closed...

 

[MaNGiNa24]

I've emailed a couple places asking about group buys with hydro graphics work. I'll post the reply when I get it.

 

[MaNGiNa24]

Alright, I've contacted a company that specializes in water transfer/hydrographics/cubic transfer/whatever other name you'd like to call it and they have agreed to do a group buy with us.

Before making this official and contacting the mods, I'd like to make sure we can follow up with the stipulations suggested by the company who will be doing the work for us.

They want at least 10 people in order to get it going, so I want to make sure we can deliver before I start forum whoring (2gnt here I come!) as I'd like to get as many of us in as possible, for both the community as well as helping out the people who are giving us incredibly discounted prices.

Here are some pics of thier work.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[MaNGiNa24]

Forgot to post up prospective prices.

A little chart I made:

You must be logged in to view this image or video.

And a direct quote from thier very nice customer service handler:

I am currently trying to determine weather or not all pieces need to be done in order to get in on the group buy, and as stated, these prices are all without shipping.

 

[EclipseGSX012]

Forgot to post up prospective prices.

A little chart I made:

You must be logged in to view this image or video.

And a direct quote from thier very nice customer service handler:

>Hi Tiago -
>
>Here is the pricing you requested according to the dimensions you gave in
>the picture.
>
>A - $100.00 pair
>B - $22.50 pair
>C - $10.50 pair
>D - $20.00
>E - $10.00
>F - $10.00
>G - $3.00
>H1 - $25.50
>H2 - $3.00
>I - $52.50
>J - $18.00
>K - $32.00
>Total for all pieces = $307.00
>
>This does not include shipping and is assuming these pieces are ABS plastic
>and there are at least 10 people in the buy that all want carbon fiber.

I am currently trying to determine weather or not all pieces need to be done in order to get in on the group buy, and as stated, these prices are all without shipping.

This is the group price or by one person? what's the website?

 

[MaNGiNa24]

This is the group price or by one person? what's the website?

Group buy.

http://www.vcfinishes.com/ is the website. Thier customer service is great, Sandy does a wonderful job and shows much interest in our little community

My aim name is mangina24, please feel free to IM me anytime with any questions. I'm looking to get this going as soon as possible, seeing how I don't feel like paying the same price and sending it out to Korea where we won't have an idea about the quality of the product until it's recieved.

 

[EclipseGSX012]

Group buy.

http://www.vcfinishes.com/ is the website. Thier customer service is great, Sandy does a wonderful job and shows much interest in our little community

My aim name is mangina24, please feel free to IM me anytime with any questions. I'm looking to get this going as soon as possible, seeing how I don't feel like paying the same price and sending it out to Korea where we won't have an idea about the quality of the product until it's recieved.

i understand what your saying. I'm interested on doing it also.

 

[MaNGiNa24]

i understand what your saying. I'm interested on doing it also.

Excellent. I just need a couple other confirmations before I contact the mods about the group buy.

 

[EclipseGSX012]

Excellent. I just need a couple other confirmations before I contact the mods about the group buy.

i check njdsm nobody is really down for it. I dont think they might not be interested man. but let me know about it.

 

[nerfbars]

Alright there in Michigan!!! Thats way better than Korea. There probably about 3 hours away from me then. I am pretty interested. I would like to know there turn around time. My car in is the body shop right now for the next few weeks. When its out I will want to show it off and not have the interior torn apart for long.