The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

car wont start after manifold cleaning

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

91talon_gst-x

Probationary Member
29
0
Dec 11, 2007
meridian, Idaho
So my intake manifold was filled with oil, took it all apart and cleaned it out. i made sure it was dry when i installed it. hooked everything back up, made sure there was fuel in the rail, and it wont start. it turns over but wont run. what could it be?

Nate
 
dont forget looking at the coil from left to right 4123. Number one cylinder is closest to the timing belt and number 4 cylinder is closest to the transmission. If you could get the plugs from the junk yard that would be great because I may need them for my harness because those wires on my good harness are getting flimsey too. good luck.
 
i think your talking about spark plugs meliketoball, those are new. were talkin about the ones on the thermostat housing towards the bottom of it, the two little black connectors. just thought i would clear that up for ya..
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top